![](/images/new-backgrounds/1149436/149436249x1.webp)
Chapter 4
Configuration via the Command Line Interface
4.4.2 List all peer entities
list command The ipsec peer list command shows the list of all defined peer entities.
Example In the following example, a list of all defined peer entities is created.
[ipsec]=> |
|
[ipsec]=>peer |
|
[ipsec peer]=>list |
|
[peer1] | : 200.200.0.1 |
Remote Address | |
Backup Remote Address: <unset> | |
Physical IF | : DIALUP_PPPOE |
Exchange Mode | : main |
Local Identifier | : (addr)100.100.0.1 |
Remote Identifier | : (addr)200.200.0.1 |
Descriptors | : AES_MD5 |
Authentication | : secret1 |
Client/Server | : <unset> |
Options | : <unset> |
[ipsec peer]=>
By default, the SpeedTouch™ device does not contain any peer entities. As a consequence the list command will return an empty list on new devices.
123 | |
|