Nortel Networks 8010co manual Attaching the positive lead

44Chapter 2 Installation

9Attach the lug end of a 125-inch power supply cable to the positive terminal on the power supply (Figure 26).

Use a 7/16-inch hex wrench to fasten the hardware in the correct order.

Figure 26 Attaching the positive lead

1

2

3

+DC -DC

4

1	= Two-hole crimp lug	3	= Hex nut (x 2)
2	= Lock washer (x 2)	4	= Positive lead wire

10429FA

312755-G Rev 00