Palm PDA CentroTM Smart Device manual Selecting cities, Press Applications and select World Clock

Selecting cities

World Clock shows the system date and time above the world map. If you selected the option to get the date and time from the mobile network (see Setting the date and time), the AT&T network automatically updates the time display to match the local time when you travel.

Y O U R P E R S O N A L I N F O R M A T I O N O R G A N I Z E R	9
	C H A P T E R

TIP If you did not select the option to get the date and time from the mobile network, you can set the city at the top of the screen to a fixed location.

Below the world map, you can view the time in two other cities.

TIP If you travel a lot, you may want to select your home city as one of these two cities, so that you always know what time it is at home.

1Press Applications and select World Clock .

2Select a City pick list, and select a city in the same time zone.

DID YOU KNOW? You can run your stylus over the map to see the time in other cities. The shadow over the map represents nighttime moving across the globe.

TIP World Clock does not automatically update the system time for daylight-saving time. To change the Daylight Savings Time setting, see Setting the date and time.

Adding cities

If the city you want to display is not in the predefined list, you can add it.

1Select a City pick list and select Edit List.

2Select Add.

3Select a location in the same time zone as the city you want to add, and then select OK.

W O R L D C L O C K 197