4

Y O U R P H O N E

C H A P T E R

Turning your phone on and off

When your phone is on, it is connected to the AT&T network (provided you are in a coverage area) so that you can make and receive phone calls and use wireless services, such as email, messaging, and the web browser. During initial setup, your phone is automatically turned on, so you can use wireless services right away.

If you turn off your phone, you can still use the organizer features such as Calendar and Contacts, as well as the media features such as Pocket Tunes and Pictures

&Videos. You might hear this referred to as flight mode because you must turn your phone off when you’re on a plane.

1Wake up the screen.

2Press and hold Power/End to turn on your phone.

TIP If the Ringer switch is set to Sound On, you hear a series of tones when you turn your phone on and off (see Silencing sounds).

You know your phone is on and that you’re inside a coverage area when you go to the Main tab of the Phone application and you see the Signal Strength icon at the top of the screen.

TIP If you’re outside a coverage area, the upper-left corner appears blank and the indicator light flashes red.

3Press and hold Power/End again to turn off your phone.

You know your phone is off when you go to the Main tab of the Phone application and you see Phone Off at the top of the screen.

Opening the Phone application

Press Phone to display the Main tab in the Phone application.

50 T U R N I N G Y O U R C E N T R O ™ S M A R T D E V I C E O N A N D O F F

Page 50
Image 50
Palm PDA CentroTM Smart Device manual Turning your phone on and off, Opening the Phone application