Formatting a P2 Card

 

 

1

Press the THUMBNAIL button.

 

 

 

• The thumbnail screen appears on the LCD

 

 

 

monitor.

 

 

 

 

 

2

Press the MENU button and select

 

 

 

OPERATION FORMAT from the thumbnail

6

 

 

menu.

 

 

 

• When the screen shown below appears, select

ChapterClips

 

 

 

 

ALL P2 and press the SET button.

 

 

 

 

 

 

• Select EXIT if formatting is not required.

Manipulating

 

 

 

Thumbnails

 

 

 

3

The following screen appears. Use the cursor

 

 

 

buttons and the SET button to select YES.

•The two P2 cards inserted in card slots L and R are formatted simultaneously

NOTE

•Check that no important data remains on a card before formatting since data erased by formatting cannot be recovered.

•If there are clips that are not displayed on the thumbnail screen when formatting, a warning

“FORMAT ALL P2 CARD? (INCLUDING CLIP OF OTHER REC MODE)” is displayed.

Formatting SD Memory Cards

SD memory cards can also be formatted from the thumbnail screen. With an SD memory card inserted into the unit, perform the following operation:

1 Press the THUMBNAIL button.

•The thumbnail screen appears on the LCD monitor.

2 Press the MENU button and select OPERATION FORMAT from the thumbnail menu.

•Select “SD CARD” and press the SET button when the screen shown below appears.

•Select “EXIT” if formatting is not required.

3 When the following screen appears, use the cursor buttons and the SET button to select YES.

•The SD memory card is formatted.

NOTE

•You can also use the menu option SD CARD FORMAT in the CARD FUNCTIONS screen to format SD memory cards.

For details, refer to [Formatting, Writing and Reading an SD Memory Card] (page 79).

•Check that no important data remains on a card before formatting since data erased by formatting cannot be recovered.

100