Recording ChapterPlaybackand 3  

Special Recording Modes

During P2 card recording, interval recording can be enabled from the RECORDING SETUP screen.

The interval recording mode is available only with the following settings:

SYSTEM MODE

REC FORMAT

Other conditions

1080-59.94i

AVC-I 100/60i

 

AVC-I 50/60i

 

 

 

720-59.94P

AVC-I 100/60P

Turn VFR OFF

AVC-I 50/60P

 

 

1080-50i

AVC-I 100/50i

 

AVC-I 50/50i

 

 

 

720-50P

AVC-I 100/50P

Turn VFR OFF

AVC-I 50/50P

 

 

Interval Recording (INTERVAL REC)

This function is used to record 1 frame at the time interval set in the INTERVAL TIME item.

1 frame

 

1 frame

1 frame

recording

recording

recording

 

 

 

 

 

 

 

 

 

 

 

(time)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set INTERVAL

 

 

Set INTERVAL

 

TIME setting

 

 

 

TIME setting

 

 

 

 

 

1

Check that the SYSTEM SETUP screen is set

 

up as shown in the left table.

 

For details on menu operation, refer to [Using the

 

Menus] (page 106).

 

 

2

Select INTERVAL in the menu option REC

 

FUNCTION in the RECORDING SETUP

 

screen.

 

 

3

Set the time in the menu option INTERVAL

 

TIME in the RECORDING SETUP screen.

 

 

4

Press the REC button.

• The camera will repeat 1-frame recording for the time interval set in the INTERVAL TIME option.

• Press the STOP button to stop recording.

• To cancel this function, turn the camera off or select NORMAL in the REC FUNCTION option.

• The following indications appear to the left of the operation status display.

• During recording: “I-REC” stays lit.

• During a pause: “I-PAUSE” stays lit.

When a setting of less than 2 seconds is made in step 3, “I-REC” blinks according to time setting during recording.

• When stopped: “I-” in “I-PAUSE” blinks.

NOTE

• Sound is not recorded.

• Data recorded (until the STOP button is pressed) in this mode is recorded as a single file.

40