20HD SDI OUT 1 (L) connector (BNC)

21HD SDI OUT 2 (R) connector (BNC) This connector outputs HD SDI signals.

When the menu option SDI OUT in the OUTPUT SEL screen is set to ON, the HD SDI 1 (L) connector outputs the left-lens (L) image, and the HD SDI 2 (R) connector outputs the right-lens (R) image.

When the menu option SDI OUT in the OUTPUT SEL screen is set to ON (SIDE), the HD SDI 1 (L) and HD SDI 2 (R) connectors output the SIDE by SIDE image.

NOTE

For HD SDI signals, use a double-shielded BNC cable 5C- FB or higher.

22HDMI connector

This connector outputs HDMI signals.

To output signals from this connector, set the menu option SDI OUT in the OUTPUT SEL screen to OFF. You can set character superimposition for output from HDMI with the menu option HDMI OUT CHAR in the OUTPUT SEL screen.

NOTE

•Use HDMI cables (optional) with double shield or more.

•Use of Panasonic HDMI cables is recommended.

•The HDMI connector of this product is not compatible with VIERA Link.

•When a VIERA-Link device is connected to this product with an HDMI cable, VIERA Link of the connected device may not operate properly.

23HD SDI MONITOR OUT connector (BNC) This connector outputs images for the monitor. According to the menu option MON OUT SEL in the OUTPUT SEL screen, images independent of HD SDI OUT can be output.

You can set character superimposition for output from HD SDI MONITOR OUTPUT with the menu option MON OUT CHAR in the OUTPUT SEL screen.

NOTE

For HD SDI signals, use a double-shielded BNC cable 5C- FB or higher.

24REMOTE connector

Some functions can be remote controlled when the remote control unit AJ-RC10G (optional accessory) is connected to the camera.

For details, refer to [Connecting the AJ-RC10G Remote Control Unit] (page 121).

Some functions can also be remote controlled when the AG-EC4G extension control unit (optional accessory) is connected.

For details, refer to [Connecting the AG-EC4G Extension Control Unit] (page 122).

25RETURN IN (HD SDI) connector (BNC)

This connector inputs return video signals (HD SDI signals) to allow checking the video on the LCD monitor and in the viewfinder.

NOTE

•For HD SDI signals, use a double-shielded BNC cable 5C- FB or higher.

•The input signal of the RETURN IN connector can be locked externally if the menu option GENLOCK SEL in the OTHER FUNCTIONS screen is set to RETURN IN.

Parts andapterCFunctionseirh 2

23