Setup Menu List
SCENE FILE Screen
|
| Item | Setting | Notes |
|
| FILE SELECT | Select the file you wish to use for shooting among six | • The factory default settings are the |
|
|
| scene files.Select number 1 to 6 that corresponds to | same for 1 to 6. |
|
|
| FILE1 to FILE6, respectively. |
|
|
| LOAD/SAVE/INIT | Loads, saves, and initializes the settings of the scene | • This setting does not affect scene files |
|
|
| file selected in FILE SELECT. | that are not the currently selected one. |
|
|
| LOAD: Loads data stored in camera memory. |
|
7 |
|
| SAVE: Saves current values in camera memory. |
|
|
|
| INITIAL: Returns settings to their factory defaults. |
|
|
|
|
| |
MenuOperationsChapter | VFR | Enables or disables variable frame rate (VFR) mode at | • Available only in 720P system mode. | |
| 720P. | (This message does not appear in | ||
| ON: VFR operation | modes other than 720P.) | ||
|
|
| ||
|
|
| OFF: VFR off |
|
|
| FRAME RATE | Adjusts the frame rate and exposure time at 720P | • Available only in 720P system mode |
|
|
| when VFR is on. | and when VFR is set to ON. |
|
|
| • When 59.94 Hz is selected | (This message does not appear in |
|
|
| 12, 15, 18, 20, 21, 22, 24, 25, 26, 27, 28, 30, 32, 34, | modes other than 720P.) |
|
|
| 36, 40, 44, 48, 54, 60 FRAME | • A change to 24 fps may cause the |
|
|
| • When 50 Hz is selected | screen to flicker momentarily. |
|
|
| 12, 15, 18, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32, |
|
|
|
| 34, 37, 42, 45, 48, 50 FRAME |
|
|
| (SYNCHRO SCAN) | Displays synchro scan shutter speeds to enable the | • Displayed in blue when not set to |
|
|
| operator to synchronize the camera to computer | synchro scan mode and when the |
|
|
| monitors. | SYNCHRO SCAN switch settings are |
|
|
| • This function only displays the shutter speeds. Use | not available. |
|
|
| the SYNCHRO SCAN switch to set a shutter speed. |
|
|
|
| • Set values (displayed values) are assigned to the |
|
|
|
| current scene file and manipulated using the LOAD, |
|
|
|
| SAVE and INIT functions. |
|
|
|
| For details, refer to [Placing the |
|
|
|
| SYNCHRO SCAN Mode] (page 49). |
|
|
|
| • When 59.94 Hz is selected |
|
|
|
| 1/60.0 |
|
|
|
| • When 50 Hz is selected |
|
|
|
| 1/50.0 |
|
|
| DETAIL LEVEL | Adjusts the level of image outline correction (in |
|
|
|
| horizontal and vertical directions). |
|
|
|
|
| |
|
| V DETAIL LEVEL | Adjusts the level of correction in vertical direction. |
|
|
|
|
| |
|
| DETAIL CORING | Adjusts the level of noise reduction of the detail signal. |
|
|
|
|
| |
|
|
| • Adjust towards – for a clearer image. Noise |
|
|
|
| increases slightly. |
|
|
|
| • Adjust towards + for less noise. |
|
|
| CHROMA LEVEL | Adjusts the chroma level. |
|
|
|
|
| |
|
| CHROMA PHASE | Makes fine adjustments to the chroma phase. |
|
|
|
|
| |
|
| COLOR TEMP Ach | Makes fine adjustments to the color temperature (after |
|
|
|
| Ach white balance adjustment). |
|
|
|
|
| |
|
| COLOR TEMP Bch | Makes fine adjustments to the color temperature (after |
|
|
|
| Bch white balance adjustment). |
|
|
|
|
| |
|
|
|
| ____ indicates the factory setting |
110