Adjustments ChapterandSettings 4rding rfoRec
NOTE
This product is preadjusted at the factory to minimize vertical misalignment.*1 The specification for vertical misalignment is 1.2 % or less.
*1 It is indicated in percentage of vertical misalignment between the images from the left and right lenses at the center of the screen according to the effective height of the screen, when measured under the following conditions: the zoom position at the maximum wide angle (Z00), the convergence point in the center (C50), and shooting a subject at a distance of 4.3 m.
Focus (FOCUS)
Press the cursor button or . The focal length for the right lens is increased if you press , and is reduced if you press .
Iris (IRIS)
Press the EXIT (IRIS) or THUMBNAIL (IRIS) button. The iris of the right lens is opened if you press EXIT (IRIS), and is closed if you press THUMBNAIL (IRIS).
NOTE
•Holding the SET (RESET) button pressed during the 3D FINE adjustment resets all the adjusted values.
•The 3D FINE function is disabled in 2D LL recording mode.
•The appropriate adjustment area varies depending on the zoom position. Perform the fine adjustments again if the zoom position is changed.
58