Parts andapterCFunctionseirh 2
1 2 4
3
1Back tally lamp
When the back tally switch is set to ON, this lamp behaves in the same way as the front tally lamp.
2Back tally switch
Use this switch to control the back and rear tally lamps.
ON: Enables the back and rear tally lamps.
OFF: Disables the back and rear tally lamps.
3Rear tally lamp
The rear tally lamp behaves in the same way as the back tally lamp.
4WARNING lamp
This lamp starts blinking or lights when an error is detected in the memory card recorder unit.
1 2
1LCD monitor
The LCD monitor displays the video in the viewfinder. Alternatively, it can show clips on the P2 card in a thumbnail format.
For details on the setting of the LCD monitor, refer to [Adjusting and Setting the LCD Monitor/Viewfinder] (page 76).
In thumbnail display mode, you can use the thumbnail menu buttons, cursor and SET buttons to manipulate or delete clips, or format P2 cards.
For details, refer to [Manipulating Clips with Thumbnails] (page 91).
2OPEN button
Use to open the LCD monitor.
26