Attaching/Adjusting Accessories

Mounting the Camera on a Tripod

Use an optional (SHAN-TM700) tripod adapter to place the camera on a tripod.

1

Attach the tripod adapter to the tripod.

 

Tripod adapter

Pan head

NOTE

Use the holes in the tripod adapter that will make it possible to position the camera over the tripod adapter’s center of gravity.

Also, make sure that the diameter of the selected hole matches the diameter of the pan head screw.

2 Attach the camera to the tripod adapter.

• Slide the camera forward along the grooves until you hear a “click”.

Removing the Camera from the Tripod Adapter

While holding the red lever down, move the black lever in the direction of the arrow, and slide the camera backward to remove it.

Red Lever

Black Lever

NOTE

If the tripod adapter’s pin does not return to its original position after the camera has been removed, hold the red lever down and move the black lever in the direction of the arrow again, in order to return the pin to its original position.

Please note that the camera cannot be mounted if the pin remains in the center.

Attaching the Shoulder Strap

Attach the shoulder strap to the shoulder strap bracket. To detach the shoulder strap, first open the hooks, then detach the strap.

Shoulder Strap

Press to open the hook.

NOTE

Make sure that the shoulder strap is securely attached.

Adjusting the Grip Belt

The length of the grip belt can be adjusted.

Once detach the tape, adjust the grip position then fix it with the tape again.

NOTE

Be sure that the grip belt is secured.

Preparation Chapter 5  

89