MenuOperationsChapter 7

Item

Setting

Notes

REC FORMAT

Selects the recording codec as well as shooting and

 

 

recording modes.

 

 

• When SYSTEM MODE is 1080-59.94i:

 

 

An AVC-I 100 or AVC-I 50 codec is used for shooting

 

 

and recording. Recording and shooting can be

 

 

performed at 60i or 30PN (native recording) with each

 

 

codec.

 

 

AVC-I 100/60i

 

 

AVC-I 100/30PN

 

 

AVC-I 50/60i

 

 

AVC-I 50/30PN

 

 

• When SYSTEM MODE is 1080-23.98PsF:

 

 

AVC-I 100 or AVC-I 50 codec is used for shooting and

 

 

recording. Recording and shooting can be performed

 

 

at 24PN (native recording).

 

 

AVC-I 100/24PN

 

 

AVC-I 50/24PN

 

 

• When SYSTEM MODE is 1080-50i:

 

 

AVC-I 100 or AVC-I 50 codec is used for shooting and

 

 

recording. Recording and shooting can be performed

 

 

at 50i or 25PN (native recording) with each codec.

 

 

AVC-I 100/50i

 

 

AVC-I 100/25PN

 

 

AVC-I 50/50i

 

 

AVC-I 50/25PN

 

 

• When SYSTEM MODE is 720-59.94P:

 

 

An AVC-I 100 or AVC-I 50 codec is used for shooting

 

 

and recording. Recording and shooting can be

 

 

performed at 60P, 30PN (native recording) or 24PN

 

 

(native recording) with each codec.

 

 

AVC-I 100/60P

 

 

AVC-I 100/30PN

 

 

AVC-I 100/24PN

 

 

AVC-I 50/60P

 

 

AVC-I 50/30PN

 

 

AVC-I 50/24PN

 

 

• When SYSTEM MODE is 720-50P:

 

 

An AVC-I 100 or AVC-I 50 codec is used for shooting

 

 

and recording. Recording and shooting can be

 

 

performed at 50P or 25PN (native recording) with each

 

 

codec.

 

 

AVC-I 100/50P

 

 

AVC-I 100/25PN

 

 

AVC-I 50/50P

 

 

AVC-I 50/25PN

 

REC MODE

Sets the recording mode of this unit.

• The following functions are disabled

 

3D: Recording 3D images.

when REC MODE is set to 2D LL.

 

2D LL: Recording the left-lens (L) image on two P2

- LCD/EVF button

 

cards inserted in P2 card slots L and R simultaneously.

- 3D MODE selector switch

 

• When the setting is changed, the message “TURN

- CONV. (convergence) dial

 

POWER OFF” appears. Then turn the power off and

- 3D ASSIST buttons

 

back on again.

- 3D FINE function

 

 

• Clip meta data and shot marks are

 

 

added to the clip in the P2 card in

 

 

card slot L.

 

 

____ indicates the factory setting

112