Item | Setting |
| Notes |
USER FILE | Reads/writes user files (files other than SCENE FILES) |
| |
| from/onto the SD memory card. |
|
|
| FILE SELECT: Selects user files (1 – 4). |
|
|
| READ: Reads the user file (1 – 4) settings stored on |
| |
| the SD memory card. |
|
|
| WRITE: Saves the current user file (1 – 4) | settings to |
|
| the SD memory card. |
|
|
| TITLE RELOAD: Reloads title list. |
|
|
SD CARD FORMAT | Formats SD memory cards. |
|
|
|
|
|
| 7 |
|
|
|
|
|
Item | Setting | Notes |
|
|
OUTPUT SEL | Sets where to output the effect of 3D assist function |
|
| MenuOperationsChapter |
| controlled by the 3D ASSIST buttons (Z WFM/ALERT/ |
|
| |
|
|
|
| |
| CONV.). |
|
|
|
| LCD: The effect of the 3D assist function is output to |
|
|
|
| the LCD monitor only. |
|
|
|
| LCD/EVF: The effect of the 3D assist function is output |
|
|
|
| to the LCD monitor and viewfinder. |
|
|
|
NEAR LEVEL | Selects the alert level for a short distance in the 3D | • Use this item to set a guide for |
|
|
| assist function. | safety shooting, preventing forward |
| |
| 0.5%, 1%, 1.5%, 2%, 2.5%, 3%, 3.5%, 4% | divergence. |
| |
FAR LEVEL | Selects the alert level for a long distance in the 3D | • Use this item to set a guide for safety |
|
|
| assist function. | shooting, preventing backward |
| |
| 0.5%, 1%, 1.5%, 2%, 2.5%, 3%, 3.5%, 4% | divergence. |
| |
DETECTION RANGE | Selects the detection range of the 3D assist function. | • Use this item to prevent excessive |
|
|
| NARROW: 6.56 % (1080) | separation due to backward |
| |
| WIDE: 13.12 % (1080) | divergence. |
| |
Z WFM SCALE | Selects the display mode of the 3D assist function. |
|
|
|
| NORMAL: Displays all the detection area. |
|
|
|
| 2 x : Displays a clip in half the detection area. |
|
|
|
Item | Setting | Notes |
USER FILE | Saves user files to camera memory, loads them into | • This does not affect options in the |
| camera memory or initializes them. (For details, refer | SCENE FILE screen. |
| to page 78, 107.) | • The TIME ZONE setting is not |
| LOAD, SAVE, INITIAL | initialized. |
ACCESS LED | Determines whether or not the P2 card access LED |
|
| should light. |
|
| ON, OFF |
|
ALARM | Sets the alarm sound output when an alarm occurs. |
|
| HIGH, LOW, OFF |
|
REC TALLY | Selects the recording status indicator of the camera. |
|
| RED: Red tally lamp lights. |
|
| GREEN: Green tally lamp lights. |
|
| OFF: The tally lamp does not light. |
|
EVF BAT LED | Selects whether the BAT lamp inside the viewfinder is |
|
| to light or not when the remaining battery capacity is |
|
| below NEAR END. |
|
| ON, OFF |
|
CLOCK SETTING | Sets the internal calendar (date) |
|
| For details, see [Setting Date and Time of Internal |
|
| Clock] (page 28). |
|
|
| ____ indicates the factory setting |
119