NOTE

•The 3D assist function is disabled when the LCD/EVF mode is set to MIX, SIDE or R IMAGE.

•The 3D ASSIST buttons are disabled in 2D LL recording mode.

•Any 3D recording of a flat image or repetitive pattern may not be reproduced with correct depth information.

Adjustment between Two Lenses

(3D FINE Function)

As the left and right lenses are linked, you normally do not have to adjust them.

If you wish to perform fine adjustments between the two lenses, the 3D FINE function allows you to adjust the vertical position of the images, focus, and iris.

When the SHIFT button is pressed, the functions of the menu/thumbnail operation buttons change for the 3D FINE function.

NOTE

•The 3D FINE screen is not displayed during recording. Perform the 3D FINE adjustment before recording.

•The appropriate adjustment range varies depending on the zoom position. If you have changed the zoom position, perform readjustment.

Adjustments ChapterandSettings 4rding  rfoRec

d c b a

aSHIFT (3D FINE) button

bCursor and SET (RESET) buttons

cEXIT (IRIS) button

dTHUMBNAIL (IRIS) button

1

2

3

Perform zoom, focus, and/or brightness adjustment.

Press the SHIFT (3D FINE) button.

The fine adjustment screen is displayed.

Adjust the following fine adjustments as necessary.

Vertical position of the images (VERTICAL) Press the cursor button R or E. The image from the right lens moves downwards by pressing R, and upwards by pressing E.

57