• REC WARNING

This is displayed during a recording error. Do the recording over. If this does not solve the problem, consult your supplier.

•CARD ERR L (R) (L/R):

This indicates trouble with the P2 card(s) inserted into the card slot(s).

•Turn the power off if the warning continues.

•If the warning persists after rerecording, replace the card with another card.

•IRREGULAR FRM SIG:

The reference signal, such as the GENLOCK input, is distorted.

•L/R DURATION NG:

The duration of the recorded clip is different between the L and R P2 cards.

•OVER MAX# CLIPS: The limit for the number of clips that can be recorded to one P2 card has been reached.

•PULL DOWN ERROR: Video pull-down sequence error in a mode such as 24P (25P)

•REC RAM OVERFLOW: Overflow of recording memory

•ERROR: Other causes

•RUN DOWN CARD L (R) (L/R)

This message indicates that a P2 card has been overwritten the maximum number of times and that normal recording cannot be guaranteed if operation continues.

It is best to replace such P2 cards with a new card.

• SYSTEM ERROR

This message indicates that a system error has occurred. This type of error can often be corrected by turning off the power and turning it back on again.

•CAM MICON ERROR: The microprocessor in the camera is not responding.

•P2 CONTROL ERROR: A P2 control error has occurred.

•P2 MICON ERROR: The P2 microprocessor does not respond

•P2 MICON LINK ERROR: A connection error between

P2 microprocessors has occurred.

•THUMBNAIL OPEN

This message is displayed in the viewfinder during thumbnail operations.

• TURN POWER OFF

This message indicates that an abnormal event has occurred, for example, that a card was removed during access or that a system mode change was made. Turn the power off and then turn it back on again.

• WARNING

These messages are displayed when an error related to the camera block is detected.

•FOCUS NG L(R)(L/R): Focus error

•ZOOM NG L(R)(L/R): Zoom error

•IRIS NG L(R)(L/R): Iris error

•ND FILTER NG L(R)(L/R): ND filter error

•CONV. NG L(R)(L/R): Convergence error

•SUB LENS NG L(R)(L/R): Sub-lens error

•VERSION MISMATCH PLEASE UPDATE

This message is displayed if a version mismatch has occurred.

Perform card updating.

•WIRELESS RF

This message indicates that reception from the wireless receiver is poor.

Camera status display

• ABB

ABB indicator

• AUTO KNEE (ON/OFF)

Displayed when changing the AUTO KNEE switch position.

• AWB

AWB indicator

• AWB P3.2K/AWB P5.6K

Displays the color temperature assigned to PRST when the WHITE BAL switch is set to PRST. Also displayed when AWB is performed in the PRST position.

• GAIN dB

Displayed when GAIN is switched.

• SHUTTER  (OFF)

Displayed when the shutter speed is changed.

3D status display

•3D ASSIST

•ALERT(ON/OFF): Status indication of the 3D ASSIST ALERT function

•CONV.(ON/OFF): Status indication of the 3D ASSIST CONV. function

•3D ASSIST ACTIVE

Displayed when the ZEBRA button is pressed while the 3D assist function is active.

•3D MODE

•NEAR: Displayed when the 3D MODE selector switch position is changed to NEAR

•NORMAL: Displayed when the 3D MODE selector switch position is changed to NORMAL.

•EXTRA ZOOM: Displayed when the 3D MODE selector switch position is changed to EXTRA.

Adjustments ChapterandSettings 4rding  rfoRec

71