Parts andapterCFunctionseirh 2
2 4
5
1 | 3 | 5 |
1MONITOR SELECT (audio channel) CH1/2, CH3/4 selector switch
Use this switch to select the audio channel whose signals are output to the speaker or earphones. CH1/2: Signal output of audio channels 1 and 2. CH3/4: Signal output of audio channels 3 and 4. The channel indications of the audio level meters on the LCD monitor and in the viewfinder show the channels selected with this switch.
2MONITOR SELECT (audio selection) CH1/3, ST, CH2/4 selector switch
This switch and the MONITOR SELECT CH1/2, CH3/4 switch select the audio signal output to the speaker or earphones.
MONITOR SELECT | MONITOR SELECT switch (lower) | |||
switch (upper) | CH1/2 | CH3/4 | ||
| CH1/3 | Audio Channel 1 | Audio Channel 3 | |
MONITOR |
| Stereo signals | Stereo signals | |
ST | from Audio | from Audio | ||
SELECT | ||||
| Channels 1 and 2*1 | Channels 3 and 4*1 | ||
|
| |||
| CH2/4 | Audio Channel 2 | Audio Channel 4 | |
*1 MIX in the menu option MONITOR SELECT in the AUDIO SETUP screen allows you to change stereo signals to a mixed signal.
3MONITOR (volume) control
Use to control the alarm sound volume and volume of sound output from the monitor speaker and earphones.
4Speaker
The speaker outputs EE sound during recording and reproduced sound during playback. The speaker emits an alarm sound when the WARNING lamp and indicator light or blink. EE sound and reproduced sound are not output during alarm sound output.
When earphones are connected to the PHONES connector, the sound from the speaker is automatically muted.
5PHONES (earphones) jack (mini jack)
This connector is designed for audio monitoring (stereo) earphones.
18