16 17 | 18 | 4 | 5 | 6 |
|
|
|
1 2 3
19
Parts andapterCFunctionseirh 2
7 8 9 10 1112 13 14 15
㻯㻭㻹㻱㻾㻭 㻾㻱㻹㻻㼀㻱 㻲㻻㻯㼁㻿㻌㻌㻵㻾㻵㻿
㼆㻻㻻㻹㻛㻿㻛㻿 㻯㻻㻺㼂㻚
Shooting and Recording (camera unit)
1Focus ring
Use this using to adjust the focus manually.
2Zoom ring
Use this using to adjust the zoom manually.
3Iris ring
Use this using to adjust the lens iris manually.
4ZOOM lever
Use this lever to perform zoom operations.
T:Zoom in
W:Zoom out
Press the lever lightly to change the zoom slowly, and hard to change it quickly.
5IRIS selector switch
Use this switch to select the lens iris adjustment mode.
M:Manual iris mode
To adjust the iris, turn the iris ring on the lens.
W:Auto iris mode
The lens iris is adjusted automatically.
6IRIS (PUSH AUTO) button
Press this button in manual iris mode. The lens iris is adjusted automatically while you hold down the button.
7CONV. (convergence) dial
Use this dial to adjust the convergence point (depth of the reference place for the 3D image).
For details, refer to [Adjusting the Convergence Point] (page 54).
NOTE
Lens operations such as iris, zoom, focus, and convergence adjustments cannot be performed during synchronization with the GENLOCK input signal.
8 ND FILTER (filter switching) selector button ( ) Use this button to adjust the amount of light entering the MOS sensor during shooting in strong outdoor lighting.
Setting | Description | ||
1 CLEAR | Does not use the ND filter. | ||
2 | 1/4 | Reduces the amount of light | |
entering the MOS sensor to 1/4. | |||
|
| ||
3 | 1/16 | Reduces the amount of light | |
entering the MOS sensor to 1/16. | |||
|
| ||
4 | 1/64 | Reduces the amount of light | |
entering the MOS sensor to 1/64. | |||
|
| ||
9SHUTTER switch
Use this switch to turn the electronic shutter on and off.
OFF: The electronic shutter is off.
ON: The electronic shutter is on.
SEL: Changes the speed of the electronic shutter. This dial switch returns to its original position when released. Each push in the SEL direction changes the shutter speed.
For details, refer to [Setting the Electronic Shutter] (page 48).
10AUTO W/B (white/black) BAL switch
AWB: Automatically adjusts the white balance. Set the WHITE BAL switch on the side to A or B and use this switch to adjust the white balance, which takes a few seconds. The adjusted value is stored in memory.
When the WHITE BAL switch is set to PRST and the AUTO W/B BAL switch is set to AWB to indicate the color temperature, pushing the AUTO W/B BAL switch towards AWB a second time allows you to change the preset color temperature.
ABB: Automatically adjusts the black balance. For details, refer to [Adjusting the White Balance and Black Balance] (page 46).
19