Adjustments ChapterandSettings 4rding rfoRec
3 Select YES in the confirmation screen and press the JOG dial button.
•“SD CARD FORMAT OK” appears and the SD memory card is formatted.
NOTE
Check that no important data remains on a card before formatting since data erased by formatting cannot be recovered.
The card will not be formatted if the following message appears when the JOG dial button is pressed:
Error message | Remedy | |
|
| |
SD CARD FORMAT NG |
| |
NO CARD | Insert an SD memory card. | |
(No SD memory card | ||
| ||
inserted.) |
| |
|
| |
SD CARD FORMAT NG |
| |
ERROR | The card may be defective. | |
(SD memory card cannot be | Replace the card. | |
formatted.) |
| |
|
| |
SD CARD FORMAT NG |
| |
WRITE PROTECT | Remove the card and | |
(SD memory card is write- | cancel the protect. | |
protected.) |
| |
|
| |
SD CARD FORMAT NG | The SD memory card is | |
CANNOT ACCESS | not accessible. When the | |
(SD memory card not | current access operation | |
accessible). | ends, reformat the card. | |
|
|
The camera stores up to six settings for specific shooting situations as scene files.
When shooting, you can retrieve the desired file instantly.
Selecting a scene file1 Select the menu option FILE SELECT in the SCENE FILE screen then press the JOG dial button.
For details on menu operation, refer to [Using the Menus] (page 106).
SCENE FILE |
| |
|
| 1 |
FILE SELECT | ||
LOAD/SAVE/INIT |
| >>> |
(SYNCHRO SCAN) | 1/60.0 | |
DETAIL LEVEL | 0 | |
V DETAIL LEVEL | 0 | |
DETAIL CORING | 0 | |
CHROMA LEVEL | 0 | |
CHROMA PHASE | 0 | |
PUSH MENU TO RETURN
2 Turn the JOG dial button to select the file
number. |
|
|
| ||
| SCENE FILE |
| |||
|
|
| > |
|
|
| FILE SELECT |
| 1 | ||
| LOAD/SAVE/INIT |
|
|
| 2 |
| (SYNCHRO SCAN) |
|
| 3 | |
| DETAIL LEVEL |
|
| 4 | |
| V DETAIL LEVEL |
|
| 5 | |
| DETAIL CORING |
|
| 6 | |
| CHROMA LEVEL |
|
| 0 | |
| CHROMA PHASE |
|
| 0 | |
PUSH MENU TO RETURN
NOTE
Changes to scene files do not affect SYSTEM MODE settings. Use the SYSTEM SETUP screen to make such changes.
80