Clip L or R recorded in 2D LL mode is not inserted. Insert a P2 card that contains the missing clip.

12 X Defective Clip Indicator and ? Unknown Clip indicator

This marker is displayed for defective clips, which may result from a variety of causes, e.g., powering-down during recording.

Clip with yellow defective clip indicators can be restored in some cases. Please refer to [Restoring Clips] (page 96) for more information.

A clip displayed with a red defective clip indicator cannot be restored and must be deleted. If the clip cannot be deleted, format the P2 card.

?is displayed for clips such as those which differ in format from the P2 standard.

13 ! Incomplete Clip Indicator

Indicates that although a clip is recorded across multiple P2 cards, one of these cards is not inserted into a P2 card slot.

14 M Shot Mark Indicator

This marker is displayed for a clip with a shot mark attached. For details, refer to [Shot Marker (SHOT MARK) Recording Function] (page 41).

15 P Indicator for clips with proxy

This marker is displayed for clips with proxy attached.

16 T Text Memo Indicator

This marker is displayed for a clip with a text memo attached.

17 E Edit Copied Clip Indicator

In models which support edit copying, such as the AJ- HPM110, this marker is displayed on clips which have undergone edit copying. For more information about edit copying, see the instruction manual for a model that supports edit copying.

Selecting Thumbnails

Multiple thumbnails can be randomly selected in the thumbnail screen.

1 Use the cursor buttons to move the pointer (yellow frame) to the desired clip and press the SET button.

•The frame around the selected thumbnail changes to a blue frame. Press the SET button again to deselect the clip.

2

Additional clips can be selected by repeating

 

step 1.

It is possible to display only the selected thumbnails in the thumbnail screen for playback. Please refer to [Switching the Thumbnail Display] (page 94) for more information.

NOTE

•To move the pointer to the first or last clip, hold down the SHIFT button and press the up and down cursor (E / R) buttons.

•To select a sequence of clips, select the first clip and move the pointer to another clip. Then hold down the SHIFT button and press the SET button. This will select all clips from the clip selected first to the clip at the pointer and all clips in between.

•To cancel selected clips, hold down the SHIFT button while pressing the EXIT button.

Manipulating ChapterClips 6

Thumbnails

a

b c d e f

aLCD monitor

bTHUMBNAIL button

cEXIT button

dE Q R W cursor buttons

G SET button

eMENU (thumbnail menu) button

fSHIFT button

93