5

Press the JOG dial button or the SET button to

 

 

change the setting value.

 

 

 

 

SW

MODE

 

 

 

LOW GAIN

 

 

 

 

 

 

 

0dB

 

 

 

 

MID GAIN

 

3dB

 

 

 

 

HIGH GAIN

 

 

6dB

 

 

 

 

USER MAIN

 

PUSH9dBAF

 

 

 

USER1

Y12dB

 

 

 

 

 

 

 

 

 

 

USER2

SHOT MARK

 

 

 

RET

REC CHECK

 

 

 

LCD/EVF

MIX/R

 

 

 

 

 

 

 

 

 

 

 

 

 

PUSH MENU TO RETURN

 

 

 

 

 

 

 

 

 

 

6

To change other settings, repeat steps 4 and 5.

 

 

• When you finish, press the MENU button to return

 

 

 

to the function screen.

 

 

 

 

 

 

 

 

 

7

To change other functions, repeat steps 2 to 5.

•To exit the function screen and return to the normal screen, press the MENU button again.

NOTE

Direct close function

When the MENU button is pressed and held down after making a menu setting, the setting menu screen closes without first returning to the previous setting menu.

To quickly change settings (MASTER PED and H PHASE only)

• Fast UP

Hold down the JOG dial button while turning it upwards and maintain this position. Or, hold the cursor button () pressed.

• Fast DOWN

Hold down the JOG dial button while turning it downwards and maintain this position. Or, hold the cursor button () pressed.

Initializing the Menu Settings

The menu settings contain both the user file settings and the scene file settings. You can initialize them separately.

To initialize scene files (i.e. all the settings other than the scene file settings)

Select INITIAL in USER FILE of the OTHER FUNCTIONS screen. The current menu settings of user file will return to the factory settings.

•The TIME ZONE setting does not return to its factory default.

To initialize the scene file

Select INITIAL in LOAD/SAVE/INIT of the SCENE FILE screen. The settings for the scene file selected in FILE SELECT of the SCENE FILE screen will return to the factory settings.

• This does not affect any other scene files.

Initializing user files and scene files simultaneously

You can return the user files and the six scene files to their factory defaults by selecting YES in the menu option MENU INIT in the OTHER FUNCTIONS screen.

•The TIME ZONE setting does not return to its factory default.

MenuOperationsChapter 7

107