Parts andapterCFunctionseirh 2
3 7
2 | 1 | 6 | 5 | 4 |
1MENU button
Hold down the button to open a setting menu screen. A second press of the button returns the previous image. This function is not available in the thumbnail display and during recording.
2JOG dial button
Use this button to go between setting menus and to select and set items in open setting menus.
In a setting menu, turning the JOG dial button downwards moves the menu cursor downwards and turning it upwards moves the menu cursor upwards. Press the JOG dial button to confirm made settings. In VFR (Variable Frame Rate) mode, press this button and use the SYNCHRO SCAN switch to change frame rates.
3THUMBNAIL button
Press this button to open the thumbnail screen. Note that this switchover cannot be performed during recording or playback.
This button is also used for iris adjustment in 3D FINE adjustment mode.
4MENU (thumbnail menu) button
In thumbnail display mode, use this button to access thumbnail menu functions to delete clips, for example.
5Cursor and SET buttons
Use these buttons to manipulate setting menus, the menu bar and thumbnails.
The four triangular buttons are cursor buttons and the square center button is the SET button.
These buttons are also used for vertical position adjustment (VERTICAL), focus adjustment (FOCUS) and resetting in 3D FINE adjustment mode.
6EXIT/CANCEL button
Press this button to exit an open thumbnail menu or property window to return to the previous image. Pressing this button while holding down the SHIFT button turns it into a cancel function allowing you to cancel clip selections at one time.
This button is also used for iris adjustment in 3D FINE adjustment mode.
7SHIFT button
Use this button together with other buttons.
•Hold down the SHIFT button and press the cursor button ([ ]) in a thumbnail screen to move the pointer to the thumbnail at the beginning or end of a clip.
•Hold down the SHIFT button and press the SET button to select all clips from a previously selected clip to the clip at the cursor location.
•SHIFT button + EXIT/CANCEL button
This button combination operates like the cancel
function.
For details, refer to [6. EXIT/CANCEL button]. Operations while the SHIFT button is pressed are shown blow each button.
This button is also used for switchover to 3D FINE mode.
NOTE
For details on the use of the buttons, refer to the following pages:
•For menu operation, refer to [Using the Menus] (page 106).
•For thumbnail operation, refer to [Selecting Thumbnails] (page 93).
•For 3D FINE operation, refer to [Adjustment between Two Lenses (3D FINE Function)] (page 57).
24