Adjustments ChapterandSettings 4rding  rfoRec

Batteries that do not indicate capacity in % (percent) Such batteries indicate the battery level in voltages.

•13.5 V: Indication of current battery voltage.

24Media remaining memory display

Indicates a remaining 3D recording time based on the remaining time on the P2 cards inserted in card slots L and R.

•Indicates remaining time in 1-minute increments from 0 to 999 minutes. 999 minutes and longer time periods are also indicated as 999 minutes.

•The display blinks when 2 minutes or less time is left.

•The display does not appear while calculating the remaining time.

25Media information display

Indicates the slots that contain P2 cards and general information on the media.

•L R light green:

 

 

 

P2 card ready for recording

•

L

R

light green in reverse:

 

 

 

P2 card selected for recording

•

L

R

flash rapidly in white:

 

-

 

The card is being recognized

•

:

No card inserted

•

P

:

Write-protected

•

F

:

Full

•

X

:

Cannot recognize

•

E

:

P2 card in an invalid format (formatting will

 

 

 

take care of this problem)

26Operation status display

•REC: Recording

•PAUSE:

Recording standby

•H : Playback pause

• Q : Play

• Y (T ) :

Fast-forward/fast-forward playback (fast- reverse/fast-reverse playback)

• 4X Y (4X T ) :

4x speed search (4x speed reverse search)

• CLIP H Q (CLIP W H ) :

Clip forward (clip reverse), cue up of single clips

During DISPLAY OFF, only the REC and special recording displays are shown at the top right. Special recording display

The indication “I-“ appears when the interval recording is set to ON.

Center Information Display

The following information displays are provided.

P2 card recording and playback data indications

• BOS

Beginning of stream. No more data is available in the rearward playback direction.

• CANNOT PLAY

Appears when playback is disabled.

• CARD ERR (L) (R) (L/R):

This indicates trouble with the P2 card(s) inserted in the card slot(s) shown has (have). trouble.

•UPDATING: Reading card data

•CANNOT REC

Appears when recording cannot be started by pressing the REC button.

• EOS

End of stream. No more data is available in the forward playback direction.

• SHOT MARK ON (OFF) (INVALID)

SHOT MARK appears when the user button or the lens RET button to which it has been assigned is pressed.

• SYNC POSI FAILED

Appears when the synchronization of the clip position has failed.

Errors and warnings

Errors and warnings appear when something goes wrong with the camera or a P2 card malfunctions. If the problem cannot be solved by turning off the camera and turning it back on, try replacing the card and if that does not help, it may be necessary to consult your supplier.

• DIR ENTRY NG CARD L (R) (L/R)

This message indicates that the directory on the card has become corrupted and that normal recording cannot be guaranteed if operation continues. Make a quick backup of card data and reformat the card.

• FAN STOPPED

FAN (1, 1/2, 1/3, 2, 2/3, 3, 1/2/3)

This indicates an error with the fan. The fan is under suspension.

• FORMAT ERR !

This indicates a P2 card that does not meet the P2 card standard

• HIGH TEMPERATURE

A high-temperature error is detected.

• INCOMPATIBLE CARD

This message indicates that the inserted card does not meet required standards and cannot be used.

• LOW BATTERY

This message indicates that the battery is depleted.

70