Adjustments ChapterandSettings 4rding  rfoRec

Setting the Electronic ShutterSetting the Shutter Mode andSpeed

1 Press the SHUTTER switch positioned at OFF towards ON.

SHUTTER switch

2 Press the SHUTTER switch towards SEL. Repeat this switchover until the desired mode or speed appears on the LCD monitor and in the viewfinder.

•If all modes and speeds are available, the display changes in the following order:

•The bracketed (  ) speeds cannot be selected

when VFR is on.

When SYSTEM MODE is set to 1080-59.94i or 720-59.94P

For 60i and 60P recording

S/S(1/15) (1/30) 1/60

1/100 1/120 1/250

For 30P recording

S/S (1/15) 1/60 1/100 1/120 1/250

For 24P recording

S/S(1/12) 1/60 1/100 1/120 1/250

When SYSTEM MODE is set to 1080-50i or 720- 50P

For 50i and 50P recording

S/S (1/12.5) (1/25) 1/50 1/60 1/120 1/250

For 25P recording

S/S (1/12.5) 1/50 1/60 1/120 1/250

NOTE

•In any electronic shutter mode, a slower shutter speed will reduce camera sensitivity.

•In auto iris mode, a faster shutter speed will increase the aperture and lower the depth of field.

•Changes in synchro scan and shutter speed settings may cause screen flicker.

•Under fluorescent lighting and other discharge lighting systems, horizontal stripes may appear on the screen. Changing the shutter speed may correct this problem.

•A subject that is captured when moving quickly across the field of view may appear distorted. This is due to the signal read out format of the image sensor (MOS sensor) and is not a malfunction.

•The red, blue and green dots that may appear on the screen at low shutter speeds do not indicate a malfunction.

48