An HD viewfinder can be used with this unit. It is recommended to use the optional
For details on attachment and adjustments of the viewfinder, refer to the operating instructions of the viewfinder.
16 | 10 | 15 | 9 | 17 1 | 11 13 14 |
5 6 7 8
PEAKING CHROMA CONTRAST BRIGHT
2 | 3 | 4 | 12 | |
ON | ||||
|
|
|
OFF
Parts andapterCFunctionseirh 2
1Viewfinder (optional)
The viewfinder displays the video image in color or monochrome during recording or playback. It also displays warnings and messages – indicating camera operating status and settings – zebra patterns and markers (safety zone and center markers, etc.).
2CHROMA switch
Switches the display of images between color and monochrome on the viewfinder.
ON: Displays color images.
OFF: Displays monochrome images.
3ZEBRA switch
Switches a zebra pattern inside the viewfinder.
ON: Displays a zebra pattern.
OFF: No zebra pattern is displayed.
The details of the display, such as the type of zebra pattern, can be set in the DISPLAY SETUP screen.
4TALLY switch
Controls the front tally lamp.
HIGH: Makes the front tally lamp brighter.
OFF: Turns the front tally lamp off.
LOW: Makes the front tally lamp dimmer.
5PEAKING control
Adjusts the outlines of the images in the viewfinder to make focusing easier. The setting of this control has no effect on the output signal of the camera.
6CHROMA control
Adjusts the chroma of the color for the image in the viewfinder. The setting of this control has no effect on the output signal of the camera.
NOTE
In a low temperature environment, the colors in the displayed image may be paler immediately after switching on the power.
7CONTRAST control
Adjusts the contrast of the screen inside the viewfinder. The setting of this control has no effect on the output signal of the camera.
8BRIGHT (brightness) control
Adjusts the brightness of the screen inside the viewfinder. The setting of this control has no effect on the output signal of the camera.
9Front tally lamp
Lights when the camera is shooting if the TALLY switch is set to HIGH or LOW.
Also, the lamp flashes on and off as a warning indication, in the same manner as the REC lamp inside the viewfinder.
The setting of the TALLY switch determines the brightness of the front tally lamp (HIGH or LOW).
10Viewfinder stopper
This is used to attach/detach the viewfinder.
11Eyepiece
12Back tally lamp
Lights when the camera is shooting. Also, the lamp flashes on and off as a warning indication, in the same manner as the REC lamp inside the viewfinder.
The back tally lamp is hidden when the lever is in the OFF position.
13Diopter adjuster ring
Adjust this control to match the vision of the person using the camera so that the image on the screen in the viewfinder is as clear as possible.
14Lock ring
15Connection plug
16Microphone holder
17Slide rail
27