NOTE

•LOCATION (recording location data) data for a SHOOT cannot be deleted independently. Thus by setting ALTITUDE to empty will also delete the LONGITUDE and LATITUDE settings.

•The metadata for a clip with the ! incomplete clip indicator cannot be modified.

•The clip meta data for a clip cannot be modified if the source of clip is inserted in a wrong orientation in P2 card slot L and R or if the source of a 3D or 2D LL clip is not inserted in either slot L or R.

P2 Card Status Display

P2 Card Status Display Settings

Select PROPERTY CARD STATUS from the thumbnail menu to set the desired indication mode (remaining free space or used memory capacity) for the P2 card status display.

1 Press the THUMBNAIL button.

•The thumbnail screen appears on the LCD monitor.

2 Press the MENU button and select PROPERTY

PROPERTY SETUP P2 CARD CAP from the thumbnail menu.

•The following screen appears. Select the P2 card status display settings from the P2 CARD CAP menu option.

REMAIN:

Show remaining free space on the P2 card as the P2 card status display. (Factory setting)

USED:

Show used memory capacity on the P2 card as the P2 card status display.

Contents of P2 Card Status Display Settings

From the thumbnail menu, select PROPERTY CARD STATUS. The following screen appears.

When “REMAIN” is selected:

1 2

3 5

4

1Write-protect mark

The mark appears if the P2 card is write-protected.

2L/R P2 card status (remaining free space)

The remaining memory capacity of the P2 card is indicated by a bar graph and percentage. The bar graph indicator moves to the left as the remaining free space decreases. The following indications may appear, depending on the card status:

FORMAT ERROR!:

An unformatted P2 card is inserted.

NOT SUPPORTED!:

An unsupported card is inserted in the camera.

NO CARD!:

No P2 cards are inserted.

Use the cursor button to place the cursor on the P2 card for data you want to access and press the SET button to display detailed information about the P2 card to check individual information such as the serial number and the user ID.

3L/R P2 card remaining capacity/total capacity Displays the P2 card remaining capacity and total capacity in minutes. The digits representing less than minutes are rounded down.

Note that the indicated capacity will vary according to the frame rate in native recording with VFR operation. The remaining capacity becomes 0 with a P2 card on which the number of recorded clips reached the limit or with a write-protected P2 card.

4Remaining 3D/2D LL recording capacity Displays the remaining capacity for recording, calculated from the remaining free space of the P2 cards inserted in card slots L and R.

5Warning symbol

Inserting the following type of P2 cards will display the (  ) symbol.

Manipulating ChapterClips 6

Thumbnails

103