Panasonic AG-3DP1G Setting for Your Area (Color TV Standard Setting)

Setting for Your Area (Color TV Standard Setting)

This unit is delivered with the area setting, such as the color TV standard, not yet specified. To revise the settings, perform the following steps:

1	After connecting the unit to the power supply			5	Turn the JOG dial button to select SET then
	then turning on the power, hold down the				press the JOG dial button.
	DISP/MODE CHK button and press the MENU							OPTION MENU
	button.
						AREA SELECT			NTSC
									>>>
			MAIN MENU					SET
			9.CARD FUNCTIONS
		10.3D ASSIST
		11.OTHER FUNCTIONS
		12.DIAGNOSTIC
		13.OPTION MENU
							PUSH MENU TO RETURN
			PUSH MENU TO EXIT
				6	Select EXECUTE then press the JOG dial
					button.
2	Check that OPTION MENU is selected then
								OPTION MENU
	press the JOG dial button.					AREA SELECT			NTSC
	The OPTION MENU screen opens.							SET	RETURN
									EXECUTE

Overview Chapter 1  

3

4

Turn the JOG dial button to move the cursor to the AREA SELECT item then press the JOG dial button.

For details on menu operations, refer to [Using the Menus] (page 106).

OPTION MENU

AREA SELECT NTSC

SET>>>

PUSH MENU TO RETURN

Turn the JOG dial button to select the color TV standard of your area, NTSC or PAL, then press the JOG dial button.

	OPTION MENU
AREA SELECT		NTSC
	SET	PAL

PUSH MENU TO RETURN

PUSH MENU TO RETURN

7 Turn the JOG dial button to select YES then press the JOG dial button.

		AREA SETTING
INIT		NTSC	SETTING
ARE		YOU	SURE ?
	YES			PUSH SET
	NO

	The message “TURN POWER OFF” appears on the
	screen.
8	Turn the power off and then turn it back on
	again.

• The setting selected in step 4 is reflected in factory defaults and current operating status values.

13