Manipulating ChapterClips 6
Thumbnails
Press the THUMBNAIL button to display the thumbnail screen on the LCD monitor. Pressing the THUMBNAIL button again returns the display to the regular display.
When switching is done from the regular screen display to the thumbnail screen display, all the clips will be displayed on the thumbnail screen.
Pressing the THUMBNAIL MENU button allows you to navigate the thumbnail menu.
NOTE
When the TCG switch is set to “SET” to set the time code and user bits or when the camera menu is open, the THUMBNAIL button does not work.
1 | 2 | 3 |
4
5
6
7
8 | 9 | 10 | 11 |
|
| 12 13 | |
14 15 16 17
1Display Mode
Displays thumbnail types and other information screens.
ALL: Display all clips.
SAME FORMAT:
The clips in the same format as the system format are shown. To check the format, consult system mode and REC FORMAT indicated on the STATUS screen of the LCD monitor/viewfinder.
For details, see [LCD Monitor/Viewfinder Screen Status Displays] (page 67).
SELECT: The clips selected with the SET button are shown.
MARKER:
Display clips with shot marks.
UPDATING..:
Indicated when the unit is updating the screen or reading data. When the screen is being updated, the rotating icon is indicated.
For details, refer to [Switching the Thumbnail Display] (page 94).
23D logo (or 2D LL logo)
Indicates whether the displayed thumbnails are those of 3D recording or of 2D LL recording.
3Slot information
The status of the card slots L (left) and R (right) is indicated. The letter of the card slot that contains a P2 card is indicated in yellow.
NOTE
When the following P2 card is inserted, the slot letter is displayed in a magenta frame.
RUN DOWN CARD
(A P2 card on which the maximum number of overwrites has been exceeded.)
DIR ENTRY NG CARD
(A P2 card on which the directory structure is not supported.)
4Remaining battery indicator
Indicates the remaining battery capacity.
5Clip Number
The numbers set by the camera for all the clips recognized correctly by the P2 card. These numbers are allocated in chronological order, by shooting dates and times.
If clips cannot be played because of different recording formats, they are displayed in red.
6Thumbnail scroll bar
Indicates the approximate location of the current thumbnail among all thumbnails.
7Time Display
You can set this to display the time code at the start of clip recording, the user bits at the start of clip recording, the shooting time, the shooting date, the shooting date and time, clip name or USER CLIP NAME.
For details, refer to [Setting the Thumbnail Display Mode] (page 101).
8Recording mode
The recording mode for the clip on which the pointer is located is indicated.
9System mode
The format for the clip on which the pointer is located is indicated.
10Duration
The duration of the clip on which the pointer is located is indicated.
113D clip/2D LL clip abnormal status indicator
Clip L is inserted into card slot R, or clip R is inserted into card slot L. Insert the P2 cards
correctly.
Clip L or R is not inserted. Insert a P2 card that contains the missing clip.
92