Panasonic AG-3DP1G Warning and Error Display for Thumbnail Operation

Maintenance ChapterInspectionsand 9

Warning and Error Display for Thumbnail Operation

Item	Message	Description	Measure
	CANNOT ACCESS!	Data cannot be accessed because it is	Restore media and clips to normal state
	CANNOT ACCESS!	corrupted or for other reasons.	before access.
		corrupted or for other reasons.	before access.
	CANNOT DELETE !	P2 card contains contents version	Match devices and contents versions, and
	CANNOT DELETE !	mismatches or bad clips.	repair bad clips.
		mismatches or bad clips.	repair bad clips.
	CANNOT FORMAT!	Formatting cannot be made due to some P2	Check the P2 card.
		card problem.
	CANNOT REPAIR!	Data cannot be repaired since content that	Check selected content.
	CANNOT REPAIR!	cannot be repaired is selected.	Check selected content.
		cannot be repaired is selected.
	CANNOT REPAIR IN	Some of the selected clip could not be	—
	SELECTION!	repaired.	—
	SELECTION!	repaired.
	CARD FULL!	The P2 or SD card is full.	Insert media with sufficient capacity.
	INVALID VALUE!	Entered data was invalid.	Enter data in a valid range.
	LACK OF CAPACITY!	The recording capacity on the P2 card is	Insert a card with sufficient recording
	LACK OF CAPACITY!	insufficient.	capacity.
		insufficient.	capacity.
	MISSING CLIP!	You tried to add a shot mark to a clip that had	Any clip recorded across multiple cards is
	MISSING CLIP!	been recorded across multiple cards, using	not supported.
		another 3D device.	not supported.
		another 3D device.
Thumbnails	NO CARD!	No P2 or SD card is inserted.	Insert compatible media.
	NO FILE!	The designated file is not found.	Check the file.
	NO SD CARD!	No SD card is inserted.	Insert an SD card.
	TOO MANY CLIPS!	Too many clips are selected.	Reduce the number of selected clips.
			• Match devices and contents versions.
	UNKNOWN	P2 card contains contents version	• If corrupted clips exist (including
	UNKNOWN	P2 card contains contents version	corrupted clips that are located on the
	CONTENTS FORMAT!	mismatches or corrupted content.	corrupted clips that are located on the
	CONTENTS FORMAT!	mismatches or corrupted content.	copy destination), repair the corrupted
			copy destination), repair the corrupted
			clips or delete them.
			Use UTF-8 for the metadata character
	UNKNOWN DATA!	The metadata character code is invalid.	code. Use the viewer to enter correct
			characters.
			The user clip name plus the counter
	USER CLIP NAME	Characters in the clip name had to be	value can only contain up to 100
	USER CLIP NAME	Characters in the clip name had to be	bytes. Characters in the clip name are
	MODIFIED!	deleted in adding the counter value.	bytes. Characters in the clip name are
	MODIFIED!	deleted in adding the counter value.	automatically deleted when the total
			automatically deleted when the total
			exceeds 100 bytes.
	WRITE PROTECTED!	The P2 or SD card is write protected.	Insert write-enabled media.
Soft	CANNOT SET! INVALID	The entered value is incorrect.	Change the value.
keyboard	VALUE!

130