When using a V-mount type battery

1 Mount the V-mount adapter plate.

Insert the plate and slide it as shown below.

• To remove the plate, slide the release lever downwards.

Release lever

2 Set the battery type.

• Select the battery type listed under BATTERY SELECT. Select the menu option BATTERY SELECT from the setting menu BATTERY SETUP screen.

• When using a battery not listed under BATTERY SELECT, select TYPE A or TYPE B and set each item according to the battery characteristics.

For details, refer to [BATTERY SETUP Screen] (page 117).

NOTE

•For information about the V-mount adapter plate, please contact the store where you purchased the camera-recorder.

•With the V-mount adapter plate installed, % (percent) values cannot be displayed when using batteries that show the remaining battery capacity.

Use of the External DC PowerSupply

1

Connect the external DC power supply to the

 

DC IN socket on the unit.

 

DC cable

 

DC IN socket

 

External DC 

 

power supply

2

Turn “ON” the power switch of the external DC

 

power supply. (If the power switch is available

 

on the external DC power supply)

3

Turn the camera-recorder power switch ON.

Preparation Chapter 5  

85