Part Names and Functions

The control panel

Name

Panel

Description

 

 

 

 

 

 

 

 

 

This lamp indicator notifies the user when the time to replace the thermal

 

 

 

 

transfer film is approaching (estimated) and of the printing contrast used

 

 

 

 

during copying.

 

 

 

 

Indicator off : Normal printing contrast.

Contrast/

 

 

 

Indicator on : Darker than normal printing contrast.

Remaining

 

 

 

Indicator flashing : Almost time to replace the thermal transfer film.

Film

 

 

 

(Note that only about 15 more sheets may be copied when

 

 

 

Indicator

 

 

 

this indicator starts flashing.)

 

 

 

Replacement film (KX-BP081 or KX-BP082) is separately

 

 

 

 

 

 

 

 

available from the dealer where you purchased your unit.

 

 

 

 

The flashing indicator will go out after the power is turned off and the printer

 

 

 

 

has been opened and closed. (When copying is performed, this indicator will

 

 

 

 

begin flashing again.)

 

 

 

 

 

Contrast

 

 

 

Each time this key is pressed, the unit will alternate between normal and

Key

 

 

 

dark contrast modes (Normal/Dark).

2-Screen

This key causes the front and back of the screen to be copied on a single

1

2

Copy Key

sheet of paper.

Copy Key

 

 

This key prints a copy of the screen.

 

 

 

 

Multi-

 

 

This indicator displays the number of copies to be made. The display

 

 

changes each time the multi-copy/stop key is pressed.

Copy/

 

 

 

 

Example : 12 9 1

 

Error

 

 

When an error occurs, a flashing symbol will appear in this display to indicate the error

 

 

Indicator

 

 

 

 

status. (See page 69.)

 

 

 

 

 

 

 

 

 

 

When making multiple copies, press this key until the desired number of

Multi-

 

 

copies is displayed on the multi-copy/error indicator. This key can also be

 

 

pressed while multiple copies are being made to stop the copying

Copy/

 

 

process. The display indication changes while multiple copies are being

 

 

 

 

Stop Key

 

 

 

 

made as shown below. After reaching 0, the display will reset to 1.

 

 

 

 

 

 

Example: 5 4 3 2 1 0 1 (countdown display during copying)

 

 

 

 

Advance

 

 

This key advances the screen from right to left.

Key

 

 

 

 

 

Before you start

13

Page 13
Image 13
Panasonic KX-BP800 operating instructions Part Names and Functions Control panel Panel Description