Using the Interactive Panaboard Software
CAdjustment
The Electronic Pen or the Electronic Eraser position may largely shift by the using environment. In this case, adjust the position according to the following procedures to improve the shifted position.
(1)
in the Taskbar and click [Settings] · [Adjustment...] in the
CThe Adjustment dialog box will appear.
(2)Place the Electronic Pen at the center of the Interactive Panaboard screen and drag slowly the Electronic Pen downward about 100mm (4").
CWhen the adjustment is finished, the adjustment end message will be displayed in the Adjustment dialog box and the [Cancel] button will be changed into the [OK] button.
(3) Click the [OK] button.
Note
CFor precise adjusting, keep the Electronic Pen perpendicularly to the Interactive Panaboard screen during the adjustment. Inclined pen angle will cause the shift of position.
CTo cancel the adjustment, click the [Cancel] button by a mouse of the computer.
COptions
(1)
in the Taskbar and click [Settings] · [Options...] in the
CThe Options dialog box will appear.
(2) The following options can be set.
Show Desktop Drawing Tool when Projector Mode starts:
When this is selected, the Desktop Drawing Tool is automatically displayed after the Projector mode starts.
Print out image automatically rotates to fit printer paper direction:
When this is selected, the printing image automatically rotates to fit the direction of paper set in a printer.
(3)Click the [OK] button.
■Reference the help
in the Taskbar and click [Help Topics...] in the
CThe topics on the online help are displayed.
■Display the information about the Interactive Panaboard Software
in the Taskbar and click [About...] in the
CThe version information of the Interactive Panaboard Software is displayed.
■Exiting the Interactive Panaboard Software
in the Taskbar and click [Exit] in the
Using
CThe Interactive Panaboard Software ends. | 31 |
