Panasonic KX-BP800 Replacing Thermal Transfer Film, Push down the printer open lever to open

Replacing Thermal Transfer Film

The unit is capable of producing about 15 more copies when the contrast/remaining film indicator begins to flash. The unit has run out of thermal transfer film and can no longer make copies when the multi-copy/error indicator flashes " ". Separately available replacement film (KX-BP081 or KX-BP082) may be purchased from the dealer where you purchased the unit. Thermal transfer film is replaced as follows.

Notes on Replacing Thermal Transfer Film

COnly use the designated product (KX-BP081 or KX-BP082) from Panasonic as the replacement film. (Note that using another type of replacement film may result in degraded printing quality or damage to the unit.)

CThermal transfer film is disposable. Dispose of used thermal transfer film as "burnable" or "non- recyclable" rubbish.

CA negative of the copied image will remain on the thermal transfer film. To protect the security of your information, we recommend cutting up used thermal transfer film with scissors or shredder before disposing of it.

1	Push down the printer open lever to open the
	printer door, and remove the film cassette with

both hands.

2	Remove the used thermal transfer film from
	the film cassette and remove the four gears.

3	Next, perform steps 3 to 7 in the section
	entitled "Installing Thermal Transfer Film" that

can be found on page 14 and 15.

Film
Cassette	Printer
	Open Lever

Thermal Transfer Film

Direction for

Removing

Thermal

Transfer Film

Blue Gear

Green Gear

Thermal

Transfer Film

Green Gears

Film Cassette

20