Daily Care and Maintenance | Panasonic KX-BP800 instruction

Daily Care and Maintenance

	Clean the Printer Head
2	Dampen the tip of a cotton swab in ethyl
	alcohol and gently wipe the printer head.

Note

CNever touch the printer head or the surrounding area with your hands as this may disable copying.

Cotton Swab

Printer Head

(Gold)

	Clean the Platen Roller and the Feed Roller
3	Remove the film cassette with both hands and
3	carefully wipe any dirt or stains off the platen

roller and feed roller.

CFor details on removing the film cassette, see page 20.

CDampen a soft cloth with neutral kitchen cleaner diluted in water, wring the cloth thoroughly, and wipe the entire surface of the rollers while rotating them. If this does not remove all dirt, wipe with a cloth dampened with ethyl alcohol.

4	Attach the film cassette in its original position
4	and close the printer door.
	CFor details on attaching the film cassette, see
	page 14.
	CClose the printer door firmly until a click is
	heard.

Note

CIf " " is displayed on the multi-copy/error indicator when the power is turned on, this indicates that the film cassette has not been installed properly or that there is slack in the thermal transfer film. Check the condition of the film cassette and for slack in the thermal transfer film.

Feed Roller

Platen

Roller

Printer Door

Printer Door

66

Image 66

Panasonic KX-BP800 Daily Care and Maintenance, Clean the Printer Head, Clean the Platen Roller and the Feed Roller

Contents

Panaboard Attach your sales receipt here Things you should keep a record Federal Communications Commission Requirements Features CProjector mode Interactive functionCElectronic print board Features CWhiteboard mode Interactive functionCPC Interface Option Table of Contents Installation Table of ContentsCConsumable and accessories CAbout NetMeeting Precautions Locking the casters Push this side Markers InstallationScreen film Erasers Cable Precautions Power cordInteractive Electronic Pen Eraser Battery Projector Part Names and Functions Part Names and Functions Control panel Panel Description Installing Thermal Transfer Film Insert the four gears into the new thermalTransfer film Load the thermal transfer film into the film cassette Installing Thermal Transfer FilmInstall the film cassette Close the printer door Set the power switch to on Loading Copy Paper Loading Copy Paper Making Copies Press the copy key Making Copies Copy types and procedures Copy Type Procedure Replacing Thermal Transfer Film Push down the printer open lever to openPrinter door, and remove the film cassette with Paper Jams Remove the film cassette with both hands Open the paper cover and remove all copy Turn the power off and onPaper Jams Paper remaining inside the units paper cover Guide Maximum Paper Limit Remove the battery cover on the pen holder Before Using the Interactive FunctionSetting the Electronic Pen Right, and re-attach the battery cover Hole in the Electronic Eraser Replacing the eraser clothRemove the eraser cloth by pushing through Attach a new eraser cloth by pressing around Before Using the Interactive Function System requirements Connecting to the PC CInstalling the Interactive Panaboard Software Click Interactive Panaboard from software menuRemark Before Using the Interactive Function CInstalling Adobe Acrobat Reader When the Whiteboard mode is selected Switching the mode Settings of the Interactive Panaboard SoftwareCcom port Reference the help Using the Interactive Panaboard SoftwareCAdjustment Exiting the Interactive Panaboard Software Projector Mode Precautions when using a projector Projector Mode Basic operation flow in Projector mode CCalibration CDraw and erase handwritten lines on the Desktop Projector ModeCUse the Electronic Pen as a mouse Drag the Mouse to the area on the Desktop to be erased CRecord image and handwritten lines data on the Desktop CPlayback the recorded data by View window About Desktop Drawing Tool Desktop Drawing Tool operation CDraw and erase handwritten lines CErase all handwritten lines on the Desktop CChange Marker/Eraser settingsClick Setting in the Desktop Drawing Tool Click All Clear in the Desktop Drawing Tool CSet the background of the Desktop to the Whiteboard CSave Desktop in image fileCPrint an image of the Desktop CRedisplay handwritten lines drawn on the Desktop CRecord drawing data in IPB document CReduce display size of the Desktop Drawing Tool Click Minimum in the Desktop Drawing Tool Projector Mode About View window Whiteboard Mode Basic operation flow in Whiteboard mode Click Save As... in the File menu Whiteboard ModeCSave drawing data in a file COpen the saved data Whiteboard Mode About Whiteboard window Menu configuration Difference Details Html View Window or Whiteboard Window Operation Tool bars Create an IPB document Whiteboard window only Open an IPB documentClick New... in the File menu Click Save in the File menu Save the IPB documentSave the IPB document in another file format CSave the IPB document as an image file CSave the IPB document as a Html file Click Export · HTML... in the File menu View Window or Whiteboard Window Operation Click Fit Window in the View menu CDisplay expanded/reducedCDisplay page at the same size of the main view CDisplay page as large as possible Edit a page of the IPB document CUndo CAdd a new page to the IPB document Whiteboard window only CSelect CDelete currently displayedClick the OK button to delete CCopy selected page range to clipboard Playback the IPB document Click Start in the Page/Play Toolbar CConfirm print image of the IPB document before printing SettingsCSetting meeting information CPrint currently displayed IPB document Click Markers and Eraser... in the Settings menu CSet the interval when playing back the IPB documentClick Play... in the Settings menu CSet the marker width, color or the eraser size Click Export Image... in the Settings menu CSet a work folder and the recovery file Click File... in the Settings menuFollowing items can be set COption setting Click Options... in the Settings menu Confer on the remote place using the shared program Example of using NetMeetingWhiteboard mode About NetMeeting Remote Conferencing using Microsoft NetMeeting Cleaning the printer head, platen roller and feed roller Daily Care and MaintenanceCleaning the screen and the unit Caring for the eraser Clean the Platen Roller and the Feed Roller Daily Care and MaintenanceClean the Printer Head Attach the film cassette in its original position Troubleshooting Symptom Care and RemedyReplacing the Cloth of the Electronic Eraser Troubleshooting Symptom Care and Remedy Troubleshooting Meanings of various displays Cause Remedy Specifications Model Number KX-BP800General Input Block Output Block Interactive Specifications Consumable and accessoriesFor Print Board For Installation Manual Assembly Assembling the Print Board Attach the print board If you are using a stand If you are using a wall- mounting kitAssembling the Print Board Wipe the screen film surface Attach the power cordFit the power cord into the cord holder. Do not force it Check operations Normal print board operations check Multiple copy Other points to check Error displayPrint Board Operations Check Step Repacking Print Board Operations Check Interactive operations check Assembling the Optional Stand KX-BP065 AccessoriesCBefore assembly, be sure to lock the casters No. Part name Part illustration Qty Assembling the Optional Stand KX-BP065 Assembly Assembling the stand Assembling the Optional Stand KX-BP065 Wall-mounting Kit KX-B063 No. Part name Wall-mounting Kit KX-B063 Wall-mounting procedure Tape the wall-mounting template to the wallMount the print board. Please refer to BAttaching to metal or concrete walls Stud plugs sold in stores are needed Wall-mounting Kit KX-B063 BAttaching to plasterboard wallsBAttaching to wooden walls Memo These Operating Instructions are printed on recycled paper