Assembling the Print Board

3 Attach the print board.

If you are using a stand:

1. Hang the print board on the attachment fixtures of the stand.

2.Use the two wing bolts (M5

12 mm) provided with the stand to fasten the print board to the lower stand attachment fixtures as shown below.

CThe stand (KX-BP065) is available as an option.

74

If you are using a wall- mounting kit:

1.Remove the two wing bolts and hang the print board on the wall- mounting fixtures supplied with the wall-mounting kit.

(Please refer to page 82.)

￿L

￿R

2

￿L

￿R

1

2.Use the two wing bolts removed in step 1 above to fasten the print board to the lower wall-mounting fixtures as shown below.

Note

CWhen mounting the print board, avoid banging it. Such impact may break the internal fluorescent light or cause other damage.

CAfter mounting the print board, gradually apply weight to it to make sure that the wall is strong enough to support it.

CThe wall-mounting kit (KX-B063) is available as an option.

Page 74
Image 74
Panasonic KX-BP800 operating instructions Assembling the Print Board, Attach the print board If you are using a stand