Panasonic KX-BP800 operating instructions Wall-mounting Kit KX-B063, No. Part name

Wall-mounting Kit (KX-B063)

Before attempting installation of this wall-mounting kit, we strongly recommend consulting with the building facility nor manager, engineer, or architect. The installer needs to know the type of construction used for the wall intended for this installation and the location of wall studs. Selection of hardware is critical for safe wall-mounting, and dependent upon the nature of wall construction, installation should not occur until this consultation takes place.

Procedure for KX-B063 Wall-mounting Kit Installation

.Tools required:

One (1) KX-B063 kit

A minimum of eight (8) pieces of appropriate wall-support hardware (molley, toggle, etc.)

NOTE :THIS HARDWARE MUST BE LOCALLY PROCURED, IT IS NOT INCLUDED IN THE KIT. Drill (and drill bit of correct size) for hardware installation

Screw driver (Both phillips (+) and slotted (-) will be required.) Tape measure

Tape or thumb-tacks (2pcs) Bubble type level

.Pre-requisites

1.Before installation, make sure that the wall intended for installation is capable of supporting flush-mounted.

[ KX-BP800 is 103 kgf (227 Ibs). ]

2.The position of the intended installation is of adequate size for the selected Panaboard. [ KX-BP800 is 1,575 mm X 1,524 mm (5'2"✕5').]

3.An outlet is within 3 m (9'104/32"), and it is not located directly behind the Panaboard.

■Accessories

The package includes the parts noted below ; please confirm that all parts are present before beginning installation.

Eight screws for mounting the fixtures on the wall are not provided. Please purchase the appropriate wall-mounting hardware (sold in stores). Refer to pages 83 and 84.

No. Part name			Order
	Part illustration, Q'ty of use
Wall-mounting	L	✕2	3
fixture L

Wall-mounting	R	✕2	3
fixture R
		✕2
Wing bolt	M5✕12 mm (15/32")		—
	No use*

These are used for other models.

No. Part name		Order
	Part illustration, Q'ty of use
	✕4
Screw	M4✕16 mm	—
	No use*

Wall-mounting	✕1	2
template

No use*

Use the wall-mounting template provided with KX-BP800.

Installation

81