9. Programmable Features
59

9.2 Basic features

Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 24 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 25 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 26 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR [±]
To print a sending report for fax transmission
results (page 40).
ERROR (default): A sending report will be
printed only when fax transmission fails.
ON: A sending report will be printed after every
transmission.
OFF: Sending reports will not be printed.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select 2 (default), 3, 4, 5, 6,
7, 8 or 9.
Note:
LSet feature #77 to FAX ONLY (page 62)
beforehand.
Code #06: Changing the ring setting in
TAM/FAX mo de
TAM RING COUNT
RINGS=2 [±]
To change the number of rings before the unit
answers a call in TAM/FAX mode. You can select
2 (default), 3, 4, TOLL SAVER or
RINGER OFF. See page 47 for details.
Note:
LSet feature #77 to TAM/FAX (page 62)
beforehand.
Code #10: Changing the maximum recording
time for incoming messages
RECORDING TIME
=VOX [±]
VOX (default): Unlimited.
1 MIN9 MIN: 1 minute to 9 minutes.
Code #11: Setting the remote operation ID
REMOTE TAM ID
=ON [±]
1. Press {MENU}.
2. Press {#}, then {1}{1}.
3. Press {A} or {B} repeatedly to select ON.
4. Press {SET}.
5. Enter any 3-digit number except a number
using 0 or 7.
LThe default ID is 111.
6. Press {SET}.
7. Press {MENU}.
Code #13: Setting the dialling mode
DIALLING MODE
=TONE [±]
See page 23 for details.
Code #17: Setting the ring tone for outside
calls
EXT. RINGTONE
=A [±]
To set the base unit ring tone from one of 3 tones
for outside calls. You can select A (default),
B or C.
Note:
LTo set the handset ring tone, see page 67.
FC238HK-PFQX2217ZA_en.book Page 59 Wednesday, July 27, 2005 11:02 AM