3. Preparation

3.5 Adjusting handset

3.6 Adjusting base unit

volume

volume

{j/OK}

{C}

{>}{e}{v}

{ih}

{s}

 

{INT}

Ringer volume

1.Press {j/OK}.

2.Select Handset Setup, then press {>}.

3.Select Ringer Setup, then press {>}.

4.Select Ringer Volume, then press {>}.

5.Press {e} or {v} repeatedly to select the desired volume.

6.Press {>}.

7.Press {ih}.

Note:

LAlarms will sound and the handset will ring for intercom calls and when paged even if the ringer is turned OFF.

Ring tone

You can select one of 15 ring tones for outside calls and intercom calls (page 67). Caller ID service users can also use a different ringer for each category (page 34).

Receiver volume

While using {C} or {INT}, press {e} or {v}.

Speaker volume

While using {s}, press {e} or {v}.

{SET} {A}{B}

Ringer volume

While the unit is idle, press {A} or {B}. L If any documents are in the document

entrance, you cannot adjust the volume. Confirm that there are no documents in the entrance.

To turn the ringer OFF

1.Press {B} repeatedly to display RINGER OFF= OK?.

2.Press {SET}.

LWhen a call is received, the base unit will not ring and will display INCOMING CALL.

LTo turn the ringer back ON, press {A}.

Ring tone

You can select the ring tones from one of 3 tones for outside calls (feature #17 on page 59).

Speaker volume

While using the speakerphone, press {A} or {B}.

Answering machine volume

While listening to messages, press {A} or {B}.

22

Page 24
Image 24
Panasonic KX-FC238HK Adjusting handset Adjusting base unit Volume, Int, Ringer volume, Ring tone, To turn the ringer OFF