8. Programmable Features
“60s”: Maximum recording time is 60 seconds. See page 35 for details.
Code #55 (KX-FP363 only): Greeting message for mailbox 1
BOX1 GREETING
CHECK [±]
See page 39 for details.
Code #56 (KX-FP363 only): Greeting message for mailbox 2
BOX2 GREETING
CHECK [±]
See page 39 for details.
Code #58: Setting the original mode
ORIGINAL
=NORMAL [±]
To send or copy a document with faint or dark writing, set this feature before starting transmission or copying.
“NORMAL” (default): Used for normal writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
Code #60 (KX-FP363 only): Setting the message transfer
MESSAGE TRANSFER
=OFF [±]
To transfer recorded incoming messages to another telephone (page 40), activate this feature and program the transfer telephone number.
1.Press {MENU}.
2.Press {#}, then {6}{0}.
3.Press {A} or {B} repeatedly to select “ON”.
4.Press {SET}.
5.Enter the transfer telephone number.
6.Press {SET}.
7.Press {MENU}.
Code #61
CHECK [±]
See page 40 for details.
Code #67 (KX-FP363 only): Setting the incoming message monitor
ICM MONITOR
=ON[±]
To hear an incoming message (ICM) from the speaker when the answering device is recording the message.
“ON” (default): You can monitor the incoming message.
“OFF”: Deactivates this feature.
Code #68: Setting the Error Correction Mode (ECM)
ECM SELECTION
=ON[±]
This feature is available when the transmitting/receiving fax machines are ECM compatible.
“ON” (default): To send a fax even if there is static interference on the telephone line.
“OFF”: Deactivates this feature.
LYou cannot change the setting when received documents are in memory.
Code #70 (KX-FP363 only): Calling your pager
PAGER CALL
=OFF [±]
See page 41 for details.
Code #76: Setting the connecting tone
CONNECTING TONE
=ON[±]
If you often have trouble when sending faxes, this feature allows you to hear connecting tones; fax tone, ring back tone and busy tone. You can use these tones to confirm the status of the other party’s machine.
LIf the ring back tone continues, the other party’s machine may not be a facsimile or may have run out of paper. Check with the
other party.
LThe connecting tone volume cannot be adjusted.
“ON” (default): You will hear connecting tones.
“OFF”: Deactivates this feature.
Code #77
AUTO ANSWER
=TAD/FAX [±]
“TAD/FAX” (default): Telephone Answering Device/Facsimile mode (page 29)
“FAX ONLY”: Facsimile only mode (page 29)
46