Panasonic KX-FPG381 To turn the 2-way radio mode on, To call another handset, To answer a call

3. Telephone

Note:

LIf the room monitor feature of the destination unit is OFF, “DENIED” will be displayed and busy tone will sound.

3.182-way radio communication (when the system has additional handsets)

If you purchase additional handsets (page 9), you can use two handsets in 2-way radio mode, which allows the two handsets to communicate with each other completely independent of the base unit. To use this feature, this 2-way radio mode must be turned ON for both handsets.

Once the mode is ON, the handset can be used only to talk in 2-way radio mode, and the following features cannot be used:

–Making/answering external and internal calls

–Searching caller information or the directory

–Programming

–Accessing mailboxes to listen to messages

–Receiving Caller ID information

After using 2-way radio mode, remember to turn the mode OFF, otherwise battery life (page 20) will be shortened.

LKeep the front cover page open for button locations.

3.18.1To turn the 2-way radio mode ON

Make sure the handset is not being used.

1Press {CONF/FUNCTION}.

2Scroll to “2Way radio mode” by pressing {v} or {e}, then press {>}.

3Press {v} or {e} repeatedly to select “On”.

4Press the right soft key ({SAVE}).

L The display will show “2Way radio mode”.

To turn the mode OFF

Place the handset on the charger.

L “2Way radio mode” will disappear and the mode will turn OFF.

LYou can also turn OFF the mode as follows: 1. Press {CONF/FUNCTION}.

2.Press {v} or {e} repeatedly to select “Off”.

3.Press the right soft key ({SAVE}).

3.18.2 To call another handset

Make sure the mode is ON on both your handset and the destination handset, and the displays show “2Way radio mode”.

1Press {TALK}, {SP-PHONE}or {INTERCOM/TRANSFER}.

2Enter an extension number using a dialing button ({1} to {8}).

L The called handset will ring for 1 minute. L To stop calling, press {OFF}.

3When the called party answers, talk into the handset.

L You can switch to the receiver or the speaker by pressing {TALK} or {SP- PHONE}.

4To end the conversation, press {OFF}.

To adjust the ringer volume for 2-way radio mode (high/medium/low/off)

While the handset is not in use, press {v} or {e}.

LTo turn the ringer OFF, press {v} repeatedly until “Off” is displayed. “Ringer off” will be displayed.

3.18.3 To answer a call

1Press {TALK}, {SP-PHONE}or

{INTERCOM/TRANSFER} to answer the call.

2To end the conversation, press {OFF}.

49