8. Programmable Features

Pulse”: For rotary pulse dial service.

Make sure the base unit and the handset are not being used.

1.Press {CONF/FUNCTION}.

2.Scroll to “Initial setting” by pressing {v} or {e}, and press {>}.

3.Scroll to “Set tel line” by pressing {v} or {e}, and press {>}.

4.Press {>} at “Set dial mode”.

5.Press {v} or {e} repeatedly to select the desired setting.

6.Press the right soft key ({SAVE}).

7.Press {OFF}.

Note:

LYou can also program this feature with the base unit (feature #13 on page 69).

Setting the flash time

The flash time depends on your telephone exchange or host PBX.

You can select: “90ms” (milliseconds), “100ms”, “110ms”, “250ms”, “300ms”, “400ms”, “600ms” or “700ms” (default).

Make sure the base unit and the handset are not being used.

1.Press {CONF/FUNCTION}.

2.Scroll to “Initial setting” by pressing {v} or {e}, and press {>}.

3.Scroll to “Set tel line” by pressing {v} or {e}, and press {>}.

4.Scroll to “Set flash time” by pressing {v} or {e}, and press {>}.

5.Press {v} or {e} repeatedly to select the desired setting.

6.Press the right soft key ({SAVE}).

7.Press {OFF}.

Note:

LIf the unit is connected via a PBX, PBX functions (transferring a call etc.) might not work correctly. Consult your PBX supplier for the correct setting.

LYou can also program this feature with the base unit (feature #72 on page 72).

Setting line mode

The default setting of the line mode is “B”. Generally leave this setting to “B”. If a change of the line mode setting is required by our customer call center or service personnel, change the line mode to “A”.

Make sure the base unit and the handset are not being used.

1.Press {CONF/FUNCTION}.

2.Scroll to “Initial setting” by pressing {v} or {e}, and press {>}.

3.Scroll to “Set tel line” by pressing {v} or {e}, and press {>}.

4.Scroll to “Set line mode” by pressing {v} or {e}, and press {>}.

5.Press {v} or {e} repeatedly to select the desired setting.

6.Press the right soft key ({SAVE}).

7.Press {OFF}.

Note:

LYou can also program this feature with the base unit (feature #62 on page 72).

Changing the ring setting in TAM/FAX mode

To change the number of rings before the unit answers a call in TAM/FAX mode. You can select “2” (default), “3”, “4”, “5”, “6”, “7” or “Toll saver”. See page 55 for details.

Make sure the base unit and the handset are not being used.

1.Press {CONF/FUNCTION}.

2.Scroll to “Initial setting” by pressing {v} or {e}, and press {>}.

3.Scroll to “Set answering” by pressing {v} or {e}, and press {>}.

4.Press {>} at “Number of rings”.

5.Press {v} or {e} repeatedly to select the desired setting.

L You can also select the number of rings by pressing a dialing button {0} (“Toll saver”), or {2} to {7}.

6.Press the right soft key ({SAVE}).

7.Press {OFF}.

Note:

LYou can also program this feature with the base unit (feature #06 on page 69).

Changing the maximum recording time for each incoming message

1min”, “2min” or “3min” (default): 1 minute to 3 minutes.

Greeting only”: Only plays your greeting message.

Make sure the base unit and the handset are not being used.

1.Press {CONF/FUNCTION}.

2.Scroll to “Initial setting” by pressing {v} or {e}, and press {>}.

75

Page 77
Image 77
Panasonic KX-FPG381 operating instructions Pulse For rotary pulse dial service, Setting the flash time, Setting line mode