Panasonic KX-FPG381 Code #25 Sending a fax at a specific time, Code #34 Setting the quick scan

8. Programmable Features

transmission, the unit will return to the previous setting.

“ERROR” (default): When the previous fax transmission fails and you wish to re-send the document automatically.

“OFF”: Deactivates this feature.

Note:

LThis feature is not available for broadcast transmission.

LThe calling charge may be higher as the transmission speed is slowed down.

Code #25: Sending a fax at a specific time

DELAYED SEND

MODE=OFF [±]

This feature allows you to take advantage of low- cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time.

To send a document:

1.Insert the document.

2.Press {MENU}.

3.Press {#} then {2}{5}.

4.Press {A} or {B} repeatedly to select “ON”.

5.Press {SET}.

6.Enter the fax number.

7.Press {SET}.

8.Enter the transmission start time.

LPress {*} repeatedly to select “AM” or “PM”.

9.Press {SET}.

10.Press {MENU}.

Note:

LTo cancel after programming, press {STOP} then {SET}.

Code #26: Setting the Caller ID list to print automatically

AUTO CALL. LIST

MODE=OFF [±]

“ON”: The Caller ID list will be printed automatically each time the base unit logs 50 different callers (page 40).

“OFF” (default): The Caller ID list will not be printed, but the unit will keep a record of the information for the last 50 different callers.

Code #31: Activating the Distinctive Ring feature

DISTINCTIVE RING

MODE=OFF [±]

See page 56 for details.

Code #32: Setting the ring pattern for fax (Distinctive Ring feature)

FAX RING PATTERN

RING=B–D [±]

See page 57 for details.

Code #34: Setting the quick scan

QUICK SCAN

MODE=OFF [±]

This feature is helpful when you want to remove the document for other uses, because the unit will release the document before sending or copying.

“ON”: The unit will scan the document and store it into memory first, then the unit will start sending or copying.

“OFF” (default): Deactivates this feature.

Note:

LIf the document exceeds the memory capacity, sending of the whole document or copying of the exceeded document will be canceled and this feature will be turned OFF automatically.

Code #36: Receiving oversized documents

RCV REDUCTION

MODE=92% [±]

If the size of the document sent by the other party is as large as or larger than the recording paper, the unit can reduce the document and print it. Select the desired reduction rate.

Setting	Recording	Original
	paper size	document
		size
100%	Legal	Letter, A4
	A4	Letter
92%	Letter	Letter
(default)
	Legal	Legal
	A4	A4
86%	Letter	A4
72%	Letter	Legal
	A4	Legal

Code #39: Changing the base unit display contrast

LCD CONTRAST

MODE=NORMAL [±]

“NORMAL” (default): For normal contrast.

70