9. Option

9.1Canceling the handset registration

If you no longer need to use the handset or if you need to register the handset to a different base unit of the same model, it may be necessary to cancel the registration.

Only one handset can be canceled at a time near the base unit.

Make sure the handset and the base unit are not being used.

LKeep the front cover page open for button locations.

1Press {CONF/FUNCTION}.

2Scroll to “Initial setting” by pressing {v} or {e}, and press {>}.

3Scroll to “Registration” by pressing {v} or {e}, and press {>}.

4Scroll to “Deregistration” by pressing {v} or {e}, and press {>}.

5Press {3}{3}{5} (DEL.) to delete the registration memory.

L If you make a mistake, press

{HOLD/CLEAR}, and enter {3}{3}{5}.

6Press the right soft key ({OK}).

LA beep will sound and the registration

memory will be erased on both the handset and the base unit.

L[-] is shown on the top right of the display.

O K

LIf 3 beeps sound, you entered a wrong code. Try again from step 5.

Note:

LIf you do not press a button for more than 3 minutes, the unit will return to the standby mode.

LTo register the handset to another base unit of the same model, start from step 5 in the re-

registering the handset procedure on page 77, or see page 32.

LThe handset will not work. To use it again, registration will be required (page 32, 77).

9.2Re-registering the handset

If you want to re-register the handset to the base unit or a different base unit of the same model, you need to register it to that base unit. The handset will be given a new extension number of that base unit. Only one handset can be registered at a time. Make sure the base unit and the other handsets are not being used. Registration must be completed within 1 minute.

LIf you have canceled the handset registration at the previous base unit (page 77), start from

step 5.

LKeep the front cover page open for button locations.

1Handset:

Press {CONF/FUNCTION}.

2Scroll to “Initial setting” by pressing {v} or {e}, and press {>}.

3Scroll to “Registration” by pressing {v} or {e}, and press {>}.

4Press {>} at “HS registration”.

O K

5Base unit: Press {MUTE}.

6Handset:

1. Press the right soft key ({OK}).

2.Wait until a long beep sounds and the display shows the registered number. The registration will be complete.

L The registered number “[1]” to “[8]” will be shown on the top right of the display.

77

Page 79
Image 79
Panasonic KX-FPG381 Canceling the handset registration, Re-registering the handset, HOLD/CLEAR, and enter