Recording paper jams | Panasonic KX-FPG381 manual

10. Help

–if a call is transferred to a mailbox, and the caller leaves a message (page 63), or

–if the same caller calls again (page 40).

Release the back cover by pushing in the green lever (2) in the unit.

10.3.8 If a power failure occurs

LThe unit will not function.

	L The unit is not designed for making	1
	emergency telephone calls when the power	1
	emergency telephone calls when the power
	fails. Alternative arrangements should be
	made for access to emergency services.

LFax transmission and reception will be

interrupted.
L If delayed transmission (feature #25, page
70) is programmed and the start time occurs
during a power failure, transmission will be
attempted shortly after power is restored.
L If any fax documents are stored in the
memory, they will be lost. When power is	2
restored, a power down report will be printed
out stating which contents in the memory
have been erased.	3 Open the back cover (1).
	3 Open the back cover (1).

10.4 Recording paper jams

10.4.1 When the recording paper has jammed in the unit

The display will show the following.

PAPER JAMMED

1Open the front cover (1) by pulling up the center part (2).

2

1

4Remove the jammed recording paper (1).

1

1

2Release the back cover by pushing the green button (1) on the right side of the unit.

OR

88	For Fax Advantage assistance, call 1-800-435-7329.

Image 90

Panasonic KX-FPG381 Recording paper jams, If a power failure occurs, When the recording paper has jammed in the unit

Contents

Operating Instructions How to use the operating instructions Open Buttons Location of controlsButtons Listed in alphabetical order Navigator, LOUD/SEARCH F Energy Star Thank you for purchasing a Panasonic fax machineFor your future reference Trademarks Important safety instructions Never install telephone wiring during a lightning storm Battery Battery charge For best performanceOperating distance and noise Machine Directory 101 102 Power cord Included accessoriesPart number*1 Quantity Specifications Quick start sheet Base unit Accessory informationOverview To place an order online for customers in the U.S.A. only Description of base unit buttons Description of handset buttonsHandset Description of base unit display Description of handset display Introduction and Installation Installing the ink film Ink filmOpen the front cover 1 by pulling up the center part Replacing the ink film Turn Tight Paper tray Recording paperTo use A4 size paper Battery installation Battery replacementBelt clip To attach the belt clip To remove the belt clip To switch to the speakerphone while using the headsetHeadset optional To connect an optional headset to the handset Charger unit Using surge protectorsConnections To a single telephone line jack Wall mounting the charger 45 cm 31/32 For Fax Advantage assistance, call Handset display Battery strength Battery chargeBattery strength Battery life Selecting the way to use your fax machine Stop MenuPress SET Case 1 TAM/FAX How to setupHow to receive calls Your situation SET Case 3 TEL only Preparation How to receive faxes Case 4 FAX only Handset receiver volume Adjusting handset volumeRinger volume Speaker volume Adjusting base unit volume Fax voice guidance volumeAnswering machine volume Date and time Using the handsetUsing the base unit Save Example 1015 PM 12 hour clock entry For Caller ID service usersYour logo To correct a mistake Delete button To select characters using a or BButtons Characters O M N O Display order of characters To enter your logo Example Bill Example +234 Your fax numberRegistration of additional handsets Enter the correct number Base unit Press Mute Handset Being used. Registration must be completed within 1 minuteHandset display shows the instructions as follows Press the right soft key OK Making phone calls SP-PHONE HOLD/CLEAR PAUSE/REDIAL Digital SP-PHONE Mute REDIAL/PAUSE Answering phone callsHOLD/CLEAR OFF SP-PHONE HOLD/CLEAR CONF/FUNCTION Setting is OFF. To activate this feature, seePress Digital SP-PHONEand talk into the microphone To select characters with the dialing button Buttons Making a phone call using the navigator directory Clear Erasing a stored item To cancel erasing, press Press HOLD/CLEAR again Press OFFEditing a stored item To search for a name by initial Copying the directory From a handset to the base unit or another handsetFrom the base unit to a handset Caller ID service How Caller ID is displayed Make sure the handset is not being used What , means Viewing and calling back using caller informationDial Edit If the same person calls more than once FAX/START Digital SP-PHONE Erasing caller information Caller ID number auto edit featureUsing the handset Make sure the handset is not being used Erasing all caller information Erasing specific caller information Storing caller information into the navigator directoryInto the handset Into the base unit Intercom Making intercom callsAnswering intercom calls To transfer a call from the base unit Transferring a callTo transfer a call from the handset INTERCOM/TRANSFER Call share To join a conversation Call share featureConference LOCATOR/INTERCOM Turning on the room monitor feature Base unit Room monitor featureTurning on the room monitor feature Handset Monitoring a room To call another handset To turn the 2-way radio mode onTo turn the mode OFF To answer a call Sending a fax manually FAX/START Digital SP-PHONE SET REDIAL/PAUSE Sending a fax using the navigator directory Documents you can send Adding a new item into the broadcast memory Broadcast transmissionProgramming items into the broadcast memory Erasing a stored item from the broadcast memory Receiving a fax manually Auto Answer OFF Activating TEL modeTo cancel broadcast transmission To send the same document to a one-time group of items Activating TAM/FAX mode Receiving a fax automatically Auto Changing the ring setting in TAM/FAX mode Activating FAX only modeHow to receive calls Receiving a voice message and fax document in one call Activating the Distinctive Ring feature Distinctive Ring service from your phone companyUsing two or more phone numbers on a single telephone line Ring pattern Settings Programming the ring pattern assigned for fax Other triple ring short-short Long rings More copying features Making a copy 92% Setting Recording Original Paper size Document Size 100%Default 86% To use a mailbox Mailbox featuresWhen a caller calls Caller’s recording time Pre-recorded greeting message Recording your greeting messageErasing your recorded greeting message Greeting Stop Erase To play back messages Leaving a message for others or yourselfListening to recorded messages Transfer Stop Erase Mailbox Digital SP-PHONE Erasing recorded messages Transferring a call to a mailbox Dial Playedit Remote operation with the handsetListening to recorded messages SP-PHONE OFF Remote operation using the direct commands Operating from a remote location Summary of remote operation Interrupting remote operation Turning on the Auto Answer modeRemote operations following voice menu Slow talk message playback During playback Programming advanced features Basic featuresProgramming basic features Base unit programming Advanced features Code #34 Setting the quick scan Code #26 Setting the Caller ID list to print automaticallyCode #31 Activating the Distinctive Ring feature Code #25 Sending a fax at a specific time Code #47 Setting the fax voice guidance Code #44 Setting the memory reception alertCode #46 Setting friendly reception Code #51 Setting the mailbox 2 password Code #72 Setting flash time Code #62 Setting line modeCode #67 Setting the incoming message monitor Code #73 Setting incoming call tone Programmable functions Handset programmingFunction menu table Main menu Sub-menu Setting auto talk feature Setting ringer tone for external callsSetting incoming call tone Setting dialing mode Setting line mode Pulse For rotary pulse dial serviceSetting the flash time Scroll to Initial setting by pressing v or e, and press Setting the mailbox 2 or 3 password Setting the room monitor featurePress the right soft key Save Press OFF Make sure the handset and the base unit are not being used Canceling the handset registrationRe-registering the handset HOLD/CLEAR, and enter Example Extension number Error messages Reports Error messages Display Film is empty. Replace the film with a new One Remaining film is low. Prepare a new film Recording paper jam occurred. Clear the jammed paper Unit is too hot. Let the unit cool down Registered to the base unit, see SP-PHONEor Digital SP-PHONE When a function does not work, check here Initial settingsGeneral Cordless handset Cannot redial by pressing PAUSE/REDIAL Handset stops working while being usedCannot store an item in the navigator directory Cannot receive documents by pressing *#9 on the handset Fax sending Fax receiving Copying Answering machine Recording paper jams If a power failure occursWhen the recording paper has jammed in the unit Display will show the following When the recording paper was not fed into the unit properly Document feeder cleaning Document jams sending Thermal head cleaning Do not use paper products, such as paper towels or tissues Help Reference lists and reports Base unit only Technical data about this product Paper specifications FrequencySecurity codes 225/32 Approx g 0.21 lb 5C 40C 41F 104FDimentions Standby Approx .8 W Maximum Approx .0 W FCC and Other Information FCC RF Exposure Warning Thermal Transfer Facsimile Limited WarrantyFAX categories Parts Labor Laser Facsimile 100 Customer Services directory Index #77 Auto Answer 103 No Extra Cost Panasonic FAX Advantage Program