8. Programmable Features

ERROR” (default): A sending report will be printed only when fax transmission fails. “ON”: A sending report will be printed out after every transmission.

OFF”: Sending reports will not be printed out.

Code #06: Changing the ring setting in FAX ONLY mode

FAX RING COUNT

RINGS=3 [±]

To change the number of rings before the unit answers a call in FAX ONLY mode.

You can select “1”, “2”, “3” (default) or “4”.

Code #06: Changing the ring setting in TAM/FAX mode

TAM RING COUNT

RINGS=2 [±]

To change the number of rings before the unit answers a call in TAM/FAX mode. You can select “2” (default), “3”, “4”, “5”, “6”, “7” or “TOLL SAVER”. See page 55 for details.

Note:

LYou can also program this feature with the handset (page 75).

Code #10: Changing the maximum recording time for each incoming message

RECORDING TIME

MODE=3 MIN [±]

1 MIN”, “2 MIN” or “3 MIN” (default): 1 minute to 3 minutes.

GREETING ONLY”: Only plays your greeting message.

Note:

LIf you select “GREETING ONLY”, the unit will answer a call with the greeting message, and

then hang up. The unit will not record any incoming messages.

LYou can also program this feature with the handset (page 75).

Code #11: Setting the remote operation ID

REMOTE TAM ID

ID=11

1.Press {MENU}.

2.Press {#}, then {1}{1}.

3.Enter any 2-digit number (00–99). L The default ID is “11”.

4.Press {SET}.

5.Press {MENU}.

Note:

LYou can also program this feature with the handset (page 76).

Code #13: Setting the dialing mode

DIALING MODE

MODE=TONE [±]

If you cannot make calls, change this setting depending on your telephone line service. “TONE” (default): For tone dial service. “PULSE”: For rotary pulse dial service.

Note:

LYou can also program this feature with the handset (page 74).

Code #16: Setting the recording paper size

PAPER SIZE

=LETTER [±]

LETTER” (default): Letter or legal size paper.

A4”: A4 size paper.

Code #17: Setting the ringer tone for external calls

RINGER TONE

MODE=1 [±]

To set the base unit ringer tone from one of 6 patterns for external calls. You can select “1” (default), “2”, “3”, “4”, “5” or “6”.

Note:

LTo set the handset ringer tone, see page 74.

8.3 Advanced features

Code #22: Setting the journal report to print automatically

AUTO JOURNAL

MODE=ON [±]

ON” (default): The unit will print a journal report automatically after every 30 new fax communications (page 51).

OFF”: The unit will not print a journal report, but will keep a record of the last 30 fax communications.

Code #23: Sending documents overseas

OVERSEAS MODE

MODE=ERROR [±]

If you have difficulty sending an overseas fax, activate this feature before starting transmission. “NEXT FAX”: This setting is effective only for the next attempted fax transmission. After

69

Page 71
Image 71
Panasonic KX-FPG381 operating instructions Advanced features