Panasonic KX-FPG381 operating instructions Cordless handset

10. Help

–password for mailbox 2: feature #51 on page 71, or page 76,

–password for mailbox 3: feature #52 on

page 71, or page 76.

LYou entered a one-digit number for the password of mailbox 2 or 3. Enter 2-digit number (00–99) (feature #51 on page 71, feature #52 on page 71, or page 76).

The ink film runs out quickly.

LThe help printing function, copy function, and reports also use ink film.

The unit beeps.

LRecording paper or ink film has run out. Press {STOP} to stop the beeps and install paper/ink film.

Whenever I try to retrieve my voice mail messages, I am interrupted by the fax tone.

LYou are probably entering *#9. This is the default setting for the fax activation code. If you use a voice mail service, turn the fax activation feature OFF or reprogram the activation code (feature #41 on page 71).

The speakerphone is not working.

LUse the speakerphone in a quiet room.

LIf you have difficulty hearing the other party, adjust the volume.

I cannot page the handset or base unit.

LThe called handset is too far from the base unit.

LThe called unit is in use. Try again later. L If more than one other user is using the

handsets and base unit, you may not be able to page. Try again later.

While having an intercom call, tones are heard.

LSomeone is calling you from outside. Press {TALK}, {SP-PHONE}or {DIGITAL SP-PHONE}to answer the outside call.

The unit does not display the caller’s name and/or telephone number.

LYou need to subscribe to a Caller ID service. L Other telephone equipment may be

interfering with your phone. Disconnect it and try again.

L Other electrical appliances connected to the same outlet may be interfering with the Caller ID information.

L Telephone line noise may be affecting the Caller ID information.

LThe caller requested not to send his/her information (page 40).

LIf a call is being transferred to you, the caller information will not be displayed.

The display exits the Caller ID List while viewing caller information.

LDo not pause for over 1 minute on the handset or 20 seconds on the base unit while searching.

10.3.3 Cordless handset

The handset does not work.

LMake sure that the battery is installed correctly (page 16).

LCharge the battery fully (page 20).

LClean the charge contacts and charge again (page 20).

LUnplug the AC adaptor to reset. Plug in, and

try again.

LThe handset has not been registered to the base unit. Register the handset (page 32,

77).

LRe-install the battery (page 16) and charge it fully.

The handset does not ring.

LThe ringer volume is set to OFF. Adjust it

(page 27, 49).

LIf more than one other user is using the handsets and base unit, the handset/base unit may not ring. Those users will hear incoming call tones (feature #73 on page 72, or page 74). “INCOMING CALL” will be displayed on the base unit.

The display shows “No link to base.

Walk closer to base and try again.” and an alarm tone sounds.

LThe handset is too far from the base unit. Move closer and try again.

LPlug in the AC adaptor.

LRaise the base unit antennas.

Static, sound cuts in/out, fades. Interference from other electrical units.

LUse the handset and the base unit away from other electrical appliances.

LMove closer to the base unit.

LPress {<} on the handset to turn ON the

reception booster feature (page 34).

LRaise the base unit antennas.

84 For Fax Advantage assistance, call 1-800-435-7329.