1.8.13 Clearing Features Set at Your Extension (Extension Feature Clear)
1.8.13Clearing Features Set at Your Extension (Extension Feature
Clear)
You can reset the settings of the following features on your extension to the default settings with one operation.
This feature is also known as Station Programme Clear.
Features | Default Setting |
|
|
Hot Line*1 | Off |
|
|
Message | Off |
extension users) |
|
|
|
Call Pickup Deny | Allow |
|
|
Call Forwarding (FWD)*1 | Off |
|
|
Absent Message | Off |
|
|
Paging Deny | Allow |
|
|
Timed Reminder | Cleared |
|
|
Do Not Disturb (DND)*1 | Off |
|
|
Call Waiting for intercom calls*1 | Disable (No call) |
Call Waiting for outside calls*1 | Disable (No tone) |
Executive Busy Override Deny | Allow |
|
|
BGM | Off |
|
|
Data Line Security | Off |
|
|
Parallelled Telephone | The telephone in parallel rings. |
|
|
|
|
*1 | These features may not be reset depending on the system programming. |
|
PT/SLT/PS/SIP Extn.
| 7 | 9 | 0 |
|
|
| C.Tone |
Enter | 790. |
• For Users in Canada Only:
After performing Extension Feature Clear, the setting of Call Waiting becomes "Enable (Tone)". In this case, dial tone 2 will be heard when you go
142 User Manual