Important Information
b.Selecting a complex, random password that cannot be easily guessed.
c.Changing your password regularly.
5.Perform the following when sending the PBX for repair or handing it over to a third party.
a.Make a backup of data stored on the SD Memory Card.
b.Using an SD formatter, format the SD Memory Card so that information cannot be retrieved from it.
6.To prevent data leakage, render the SD Memory Card physically unusable before disposal.
7.When user information is sent from the PBX to a PC or other external device, the confidentiality of that information becomes the responsibility of the customer. Before disposing of the PC or other external device, ensure that data cannot be retrieved from it by formatting the hard disk and/or rendering it physically unusable.
Notice
SAFETY REQUIREMENTS
For All Telephone Equipment
•Read and understand all instructions.
For the PBX
•Keep the unit away from heating appliances and devices that generate electrical noise such as fluorescent lamps, motors, and televisions. These noise sources can interfere with the performance of the PBX.
•If you are having problems making calls to outside destinations, follow this procedure to test the outside lines:
1.Disconnect the PBX from all outside lines.
2.Connect known working single line telephones (SLTs) to those outside lines.
3.Make a call to an external destination using those SLTs.
If a call cannot be carried out correctly, there may be a problem with the outside line that the SLT is connected to. Contact your telephone company.
If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX to the outside lines until it has been serviced by an authorised Panasonic Factory Service Centre.
Notes
SAFETY REQUIREMENTS
For All Telephone Equipment
•Never attempt to insert wires, pins, etc. into the vents or holes of the product.
10 User Manual