Panasonic NN-S781, NN-T791 Care of your Microwave Oven, Technical Specifications, Maintenance

Care of your Microwave Oven

BEFORE CLEANING:		AFTER CLEANING:
Remove plug from outlet. If impossible, leave		Be sure to replace the Roller Ring and Glass
oven door open to prevent oven from		Tray in the proper		position and press
accidentally turning on.		Stop/Reset	Pad to clear the Display Window.
Inside of the oven:	Glass Tray:			Outside oven surfaces
Wipe with a damp cloth. Mild	Remove and wash in warm soapy			and back vents.
detergent may be used if the oven	water or in a dishwasher. If grease			Clean with a damp cloth.
gets very dirty. The use of harsh	accumulates, clean with a non-			To prevent damage to the
detergent or abrasives is not	abrasive nylon mesh scouring pad			operating parts inside the
recommended.	and a non-abrasive cleanser.			oven, water should not be
				allowed to seep into
				ventilation openings.
				Control Panel:
				•Covered with removable
				protective film to prevent
				scratches during shipping.
				Small bubbles may appear
				under this film. When this
				happens, remove film
				carefully.
				(Hint - apply masking or clear
				tape to an exposed corner
				and pull gently to remove.)
				•If it becomes wet, clean
				with a soft, dry cloth. Do
				not use harsh detergents
				or abrasives on the Control
				Panel.

Oven Door:	Roller Ring and oven cavity floor:
Wipe with a soft cloth when steam accumulates	Wipe the bottom surface of the oven with mild
inside or around the outside of the oven door.	detergent water or window cleaner and dry.
This may occur when the microwave oven is	Roller Ring may be washed in mild soapy
operated under high humidity conditions and in	water or dishwasher. These areas should be
no way indicates a malfunction of the unit or of	kept clean to avoid excessive noise.
microwave leakage.
Technical Specifications

	NN-T791			NN-S781 / NN-S761 / NN- S751
Power Supply*:	230 - 240 V			230 - 240 V
	50 Hz			50 Hz
Power Consumption**:	1040 W 4.6 A			1040 W 4.6 A
Power Requirement (Maximum):	1890 W 8.5 A		1890 W	8.5 A
Output***:	1200 W			1200W
Outside Dimensions (H x W x D):	304 x 555 x 485 mm		304 x 555 x	497 mm
Oven Cavity Dimensions (H x W x D):	223 x 416 x 470 mm	223 x 416 x		470 mm
Operating Frequency:	2,450 MHz			2,450 MHz
Uncrated Weight:	Approx. 14.4 kg		Approx. 14.0 kg
Trim Kit	NN-TK719SQPQ (Stainless)		NN-TK719WQPQ (White)
				NN-TK719BQPQ (Black)
Trim Kit cabinet opening	576 x 389 mm		576 x 389 mm

** Voltage requirement may differ by country. Check your identification plate for power supply voltage required.

**IEC 60335-1 Test Procedure

*** IEC 705-88 Test Procedure Specifications subject to change without notice.

Maintenance

– 75 –