
COMSPHERE 3821Plus Modem
AT commands, continued | Carriage Return Character, | |
E (Command Character Echo), | Carrier On Level, | |
H (Hook Switch Control), | Cellular (Mobile), | |
I (Identification), | Cellular Enhancement, | |
O (Online Mode), | Cellular Enhancement (S91), | |
Q (Result Codes), | Cellular RJ11 Adapt, | |
recovering use of, | cellular transmit level, | |
Sn? (Display | Change Directory, | |
Sn=r (Change | change | |
using to change factory presets, | character format, | |
V (Result Codes Format), | problems, | |
X (Extended Result Codes, Dial Tone Detect, Busy | Choose Function, | |
Tone Detect), | circuit pack lock, | |
Y (Long Space Disconnect), | Clear Error Buffer (ºF), | |
Z (Reset and Load Active), | clock source (AT&X), | |
AT Escape Character, | Clone to Remote, | |
AT&T exclusive dialing, | Clone to Remote (AT&&P1), | |
Auto Make Busy (S40), | Command Character Echo, | |
Command Character Echo (ATE), | ||
command echo, | ||
Automatic Firmware Download Center, | Command mode, | |
Automatic Make Busy, | Command Response (V.25bis), | |
automatic redialing, | compression | |
Automode, | extended result codes, | |
Automode (S78), | MNP5, | |
Autorate (Dial Line), | V.42bis, | |
Autorate (Leased Line), | COMSPHERE 6700 or 6800 Series NMS, | |
| ||
| configuration options, | |
B | Dial Line, | |
DTE Interface, | ||
editing and saving, | ||
backplate DTE assembly, | error control, | |
Backspace Character, | ||
factory defaults (AT&F), | ||
Bell modulations, | ||
Leased Line, | ||
Blind Dial Pause, | ||
Line Dialer, | ||
Blind Dial Pause (S6), | ||
loading (ATZ), | ||
blind dialing, | ||
loading when disconnected (S88), | ||
Break Buffer Control, | ||
Miscellaneous, | ||
Break Buffer Control (AT\K), | ||
quick display, | ||
Break Forces Escape, | ||
saving (AT&W), | ||
Break Forces Escape (AT\K), | ||
Security, | ||
Busy Tone Detect, | ||
Tests, | ||
Busy Tone Detect (ATX), | ||
V.42/MNP/Buffer, | ||
| ||
| viewing (AT&V), | |
| Configure branch, | |
C | connect messages, | |
connect problems, | ||
cables | Control branch, | |
copy firmware to remote, | ||
CTS Control (\D), | ||
auxiliary, | ||
Customer configuration areas, | ||
DTE, | ||
| ||
equipment list, |
| |
JM8 to RJ11 crossover, |
| |
pin assignments, | D | |
Call Answer commands (V.25bis), | ||
Call Request commands (V.25bis), | Data Bits, | |
Call Response (V.25bis), | ||
Data mode, | ||
Call Setup branch, | ||
Data Rate (%B), | ||
Call Waiting, | ||
data rates supported, | ||
Callback Security, | ||
DATAKIT applications, | ||
enabling, | ||
DB25 to DB25 cable, | ||
|
| January 1999 |