default configuration options, 2-5setting with AT commands, 2-6setting with DCP, 2-5
Dial, 3-9
Dial (ATD), 4-3
Dial Command modifiers P (Pulse dial), 3-30T (Tone dial), 3-30
dial command modifiers, 4-3Dial Line Rate, 3-34
Dial Line Rate (S41), 4-19
Dial Stored Number (ATDS), 4-4Dial Tone Detect, 3-30
dial tone detect (ATX), 4-6dial tone wait, 4-3Dialer Type, 3-30dialing problems, C-3disabled commands, 3-45Disconnect, 3-9Disconnect Delay
Receive Buffer, 4-18
Transmit Buffer, 4-21disconnects, unsolicited, C-4display
configuration options, 4-11S-register, 4-5
Download Code, 3-48download failure, 3-49,C-5download latest firmware, 3-49,C-5download-only mode, 4-7
DSR Control, 3-21
DSR Control (AT&S), 4-11DTE connectors, 2-4DTE Dialer Type, 3-25DTE Interface, 3-18
DTE interface assembly, 2-3DTE password, described, 7-2DTE Rate, 3-19
in result codes, 4-6problems, C-2
set to VF rate, 4-24DTE Rate=VF Rate, 3-24DTE status, 3-12DTE-side password
backspace character, 7-10number of tries, 7-9termination character, 7-10
DTR
Alarm Reporting (S77), 3-46,4-23make busy via (S69), 4-22
DTR Action, 3-21
DTR Action (AT&D), 4-8DTR Alarm Reporting, 3-46
DTR Continuous Repeat, 3-29,4-18
E
echo command, 4-4
Edit Password Table, 7-4Edit Strap Group, 3-15EIA-232-E pin assignments, E-1End (DCP option), 3-17
Enhanced Throughput Cellular (ETC), 3-35,4-8,4-9Entry Wait Time, 7-9
equipment list, G-1equipment required, 2-1Erase All Passwords, 7-8error codes (result codes), B-1 error control, 3-39
Error Control Fallback Character, 3-40
Error Control Fallback Character (AT%A), 4-12Error Control Mode, 3-39
Error Control Mode (AT\N), 4-14Error Control Negotiate Buffer, 3-40Error Control Negotiate Buffer (AT\C), 4-13error correction, extended result codes, 3-27Escape Character, 3-25
Escape Guard Time, 3-26,4-1,4-17escape sequence (+++), 4-1,4-16
ETC (Enhanced Throughput Cellular), 4-8,4-9,4-25Extended Result Codes, 3-27
extended result codes (ATX), 4-6
F
Factory configuration area, 3-15factory default templates, 2-5Fast Disconnect, 3-31,4-24fax
+FCLASS command, 4-13operation, 5-1
problems and solutions, C-4software settings, 5-1standards, 5-1
types supported, 1-1features, 1-1firmware cloning, 4-7firmware download, 3-49,C-5firmware revision number, 4-4firmware upgrade, 3-48,3-49,C-5flow control
AT\Q command, 4-15DTE to modem, 4-15modem to DTE, 4-15modem to modem, 3-42,4-13of DTE, 3-41
of modem, 3-41
of modem and DTE, 3-41problems, C-2XON/XOFF, 3-41
Flow Control of DTE, 3-41Flow Control of Modem, 3-41frame size, 3-43
frame size (\A), 4-13
